From: Swan, Jay (jswan@sugf.com)
Date: Mon Oct 08 2007 - 11:30:42 ART
Not exactly breaking it, but here's a tip I use to shorten troublesome
traceroutes:
Router#tr 1.1.1.1 num pr 1 ti 1 ttl 1 20
That translates as "traceroute 1.1.1.1 numeric probe 1 timeout 1 ttl 1
20".
I usually have ip domain-lookup active on production equipment, so the
"numeric" option allows me to selectively turn it off if I don't want
DNS resolution. If it's an internal trace, I'll usually set the max TTL
to 10 instead of 20 (10 hops is also usually plenty to give you a good
look at any routing loop issues in lab scenarios). Twenty hops covers
most (but certainly not all) Internet destinations these days.
Jay
#17783
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
subodh.rawat@wipro.com
Sent: Monday, October 08, 2007 8:01 AM
To: sadiqtanko@gmail.com; ccielab@groupstudy.com
Subject: RE: breaking into a traceroute
Hi,
I would suggest CTRL+SHIFT+6 to break traceroute.
I will also suggest to configure "no ip domain-lookup" to avoid time it
takes to resolve hotname to IP address. It will definitely boost your
tracertoute.
HTH
Subodh
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:12 ART