From: David Heaton (david.heaton@c4.com.au)
Date: Wed Oct 10 2007 - 03:59:54 ART
The old "Big Dogs Really Like Me" ain't quite right...BDRLM
Should actually be TBLDRM
ToS (not used), BW, Load, Delay, Reliability, MTU
010100
K1=bandwidth/K2=Reliability/K3=delay/k4=Load/ k5=MTU repectfully.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of nicky noname
Sent: Wednesday, 10 October 2007 4:55 PM
To: Cisco certification
Subject: EIGRP K values
Hello,
I have a little doubt about EIGRP K values that I would like to clear up.
From what I understood, the default K values 10100, representing
K1=bandwidth/K2=delay/K3=Reliability/k4=Load/ k5=MTU repectfully.
This order does not see correct to me. I thought that bandwidth and delay
were considered by default by EIGRP............and I know that delay does
affect the EIGRP metric, as can be seen from manipulating the delay
interface variable.
So, is it Bandwidth/Load/Delay/MTU/reliability
If we want to change the defaults to make bandwith 3 times and add
reliability we use metric weights 031100. This would indicate it is
bandwidth/reliabilty/delay?
I think my confusion stems from a mixup with how you specify the default
metrics for redistribution.
redistribute ospf 1 metric 10000 100 255 1 1500 ( bandwidth,
delay,reliability,load,MTU),
They are not equal eh?
Some clear simple explaination would be nice!
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:13 ART