From: DWINKWORTH@wi.rr.com
Date: Sat Oct 20 2007 - 17:19:04 ART
We should narrow down the list of books to ones that are actually
good... not a lot of errors or incomprehensible explanations... or just
plain useless explanations...
In my opinion... its really only three or four books that are worth
owning for the R&S.
----- Original Message -----
From: Gary Duncanson <gary.duncanson@googlemail.com>
Date: Saturday, October 20, 2007 10:49 am
Subject: Re: need advice
To: shady darwish <engshad.shady@gmail.com>
Cc: ccielab@groupstudy.com
> Hi Shady,
>
> You really need to invest lots of time in reading.
>
> Labbooks and racktime are very useful, but to get the most out of
> them make
> sure you have done the foundation reading during your CCIE written
> preparations and refer to your books regularly when working labs.
>
> A lot of people skip on regular reading and invest that time and
> money in
> remote racks and labbooks only to get stuck at the prompt. They
> are
> 'undercooked' on theory.
>
> Reading helps you understand what you are being asked to do in
> practice
> labs, and how things really work.
>
> Understanding mechanisms and state machines helps you interpret
> show and
> debug output on routers and switches. Read widely and regularly!
> The
> recommended reading list and CCO is your friend.
>
> Regards
> Gary
>
> ----- Original Message -----
> From: "shady darwish" <engshad.shady@gmail.com>
> To: "Cisco certification" <ccielab@groupstudy.com>
> Sent: Saturday, October 20, 2007 11:01 AM
> Subject: need advice
>
>
> > Is it enough to depend on COD for one of the best vendor in the
> market and
> > start lab preparing or do i have to read first the recommand
> books for
> > ccie
> > R&S . by the way i do have back ground of routing and switching
> ccnp level
> > .
> >
> >
>
This archive was generated by hypermail 2.1.4 : Fri Nov 16 2007 - 13:11:17 ART