From: mike jones (ccie1q2008@hotmail.com)
Date: Wed Nov 14 2007 - 13:55:52 ART
All,
You will need to only allow the wanted VLAN's on that trunk under the
"switchport truck allowed" command. If you just pruning the VLAN from that
trunk. If you reload that switch you all have to reprun those VLAN's.
Mike
> Date: Wed, 14 Nov 2007 10:20:44 -0500> From: pahujat@gmail.com> To:
ciscocciein2006@gmail.com> Subject: Re: VTP Pruning vs. Allowed Vlan> CC:
ccielab@groupstudy.com> > Few things to consider when dealing with VTP
pruning:> > "Enabling VTP pruning on a VTP server enables pruning for the
entire> management domain.> > By default VLANs 2 through 1000 are
pruning-eligible. VTP pruning does not> prune traffic from VLANs that are
pruning-ineligible. VLAN 1 is always> pruning-ineligible; traffic from VLAN 1
cannot be pruned.> > Enabling or disabling VTP pruning on a VTP server enables
or disables VTP> pruning for the entire management domain.> > Making VLANs
pruning-eligible or pruning-ineligible on a switch affects>
pruning-eligibility for those VLANs on that device only (not on all switches>
in the VTP domain)"> >
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_4_2/config/vl
ans.htm#xtocid79807> > HTH,> Tarun> > On Nov 13, 2007 4:27 PM, CCIEin2006
<ciscocciein2006@gmail.com> wrote:> > > Task states to filter traffic on the
802.1q trunks so that only necessary> > VLAN traffic is sent over them.> >> >
Would enabling vtp pruning do the trick or should I manually edit the> >
allowed vlan list?> >> > Please don't say ask the proctor - lets assume you
already asked the> > proctor> > what he preferred and he told you to sit down
and shut up.> >> > How would you configure it?> >> >
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:29 ART