From: Mike M (mike_malan@yahoo.co.uk)
Date: Thu Nov 22 2007 - 23:18:37 ART
Hi,
I have been told by the proctor in the real lab that
"there is no negative marking".
You should not be "marked down" for having the
broadcast key word on the ipv6 global and link-local
FR map statements. Unless they specifically ask you
not to send extra broadcast traffic.
That being said, I have always put the broadcast key
word on "link-local" FR map statement only.
Maybe I am missing something by doing this??
Regards
Mike
--- Rana Bilal <rab_91@hotmail.com> wrote:
> Guys-
> At networkers 2007, I have asked this question from
> Cisco IPV6 Technical team,
> and the answer was with the global unicast IP, I'm
> going through the same
> trouble, IE and IP experts books, some places it is
> with Link-local and in
> some books it is with Global unicast
> address................ what if we add it
> with both ????? in the real lab exam.....will it
> cost any one the points
> ??????
>
> Bilal
>
> > Subject: RE: Broadcast key word with IPV6
> frame-relay MAPPING> Date: Wed, 21
> Nov 2007 20:05:24 -0600> From:
> scott.eggert@berbee.com> To:
> ccielab@groupstudy.com> > I have seen examples where
> it has been done with the
> broadcast on either> the Link local address or the
> unicast address. The Cisco
> docCD shows it> on the link local. However, the
> Internetwork experts labs show
> it on> the unicat address, like in Lab 4 task 6.2.
> I'd say it does not
> matter,> you need it one at least one static frame
> map for that link to allow>
> ipv6 multicast.> > > > -----Original Message----->
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of> Rana
> Bilal> Sent: Wednesday,
> November 21, 2007 7:38 PM> To:
> ccielab@groupstudy.com> Subject: Broadcast key
> word with IPV6 frame-relay MAPPING> > Fellas,> > I'm
> confused about using the
> broadcast key with IPV6 frame relay> mapping.> > Say
> on a point to point
> frame-relay connection between 2 routers> running>
> IPV6. Where do I need the
> boardcast key word. Do I need it with> link-local>
> address and DLCI mapping or
> I need it with global unicast address and> DLCI>
> mapping ??????????> > > >
> Bilal> > >
>
This archive was generated by hypermail 2.1.4 : Sat Dec 01 2007 - 06:37:30 ART