From: Athaide, Dwayne (DAthaide@eprod.com)
Date: Tue Dec 04 2007 - 14:30:53 ART
A traffic shaping question on one of the workbooks states
Configure R1 to use traffic shaping to reduce flow when BECN's are
detected. Average rate is 32K min should be 8K. Port Speed is 64000
bits/sec
The solution had BC configured. Is this required? If I don't configure
Bc will I lose points.
Thanks
My solution
map-class frame-relay qos
frame-relay cir 32000
frame-relay mincir 8000
frame-relay adaptive-shaping becn
solu
map-class frame-relay Stuff
frame-relay cir 32000
frame-relay bc 4000
frame-relay mincir 8000
frame-relay adaptive-shaping becn
Dwayne Athaide | Network Architecture Specialist | EPCO, Inc. |
2727 N Loop West Houston, TX 77008
713.803.2401 office | 713 803 2999 fax| dathaide@eprod.com
<mailto:dathaide@eprod.com> |
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:29 ARST