Re: Multiple lines not supported on switch class-map?

From: Bob Sinclair (bob@bobsinclair.net)
Date: Sat Dec 08 2007 - 22:22:36 ART

Gregory Gombas wrote:
> Hey gang,
>
> Can someone please tell me what the difference between these two class
> maps on 3560 are? The first one works, the other doesn't.
>
> This works:
>
> class-map match-any EF_AND_CS5
> match ip dscp cs5 ef
>
> This doesn't:
> class-map match-any EF_AND_CS5
> match ip dscp ef
> match ip dscp cs5
>
Right you are! The 3560 supports only a single match statement in the
class-map. Match-any and match-all are therefore the same. Check
this portion of the config guide:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_25_see/configuration/guide/swqos.html#wp1056668

Commercial plug: I recorded a CoD on Cat-QoS that you can find here:

http://www.netmasterclass.com/CCIE/Self-Paced-Program/Training-on-Demand/CAT-QoS-Module/

:-) 

-- 

Bob Sinclair CCIE 10427 CCSI 30427
www.netmasterclass.net

This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST