From: darth router (darklordrouter@gmail.com)
Date: Sun Dec 09 2007 - 23:42:02 ART
I think he means, can you pass the lab without full reachability? If that's
what he's asking, the answer is yes. Full reachability is only necessary if
specified. More likely, you will be given several smaller reachability
requirements, and certainly tasks in the lab can be designed to break your
prior achieved reachability.
That's one thing that threw me off with the lab. I expected to meet full
reachability requirements, based on the majority of the practice labs I did,
but this was not the
case in the real deal (my experience). It was just a shock, but didn't
affect my ability to take care of business.
DR
On 12/9/07, Joseph Brunner <joe@affirmedsystems.com> wrote:
>
> Yes
>
> But remember 80% of the points (passing) is about 95-97% of the tasks.
>
> Getting full reachability is probably the easiest thing to do, why give up
> if you don't have to?
>
> If you strive for 80 you will probably get 60 points. Your best bet is to
> try as hard as humanly possible to do a perfect lab. That is my best
> advice.
>
> -Joe
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> nhatphuc
> Sent: Sunday, December 09, 2007 12:18 PM
> To: Cisco certification
> Subject: Over 80 but not 100% reachable
>
> Hi Group,
>
> For the lab exam, If I have a score of over 80 but not fully reachable, do
> I
> pass it?
>
> Thank you,
>
> Phuc
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST