RE: VLAN over switch routed port (WAN)

From: subodh.rawat@wipro.com
Date: Mon Dec 10 2007 - 05:45:41 ART

• Next message: CCIE Sec: "Track the interface by the CRC or errors"
• Previous message: Darby Weaver: "Re: TCL Script"
• Maybe in reply to: henro: "VLAN over switch routed port (WAN)"
• Next in thread: Donghai Zhang: "Re: VLAN over switch routed port (WAN)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Try to make f0/1 of Switch 1&2 as access port with same vlan, VLAN-A.

Subodh

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
henro
Sent: Monday, December 10, 2007 1:29 PM
To: ccielab@groupstudy.com
Subject: VLAN over switch routed port (WAN)

Hi All,

I have the following scenario

VLAN-A
=====SW1-f0/1==============================SW2-f0/1==========VLAN-A
                 10.10.10.1/30
             10.10.10.2/30

How can I extend VLAN-A across the WAN link between SW1 and SW2 as shown
above without introducing overhead.

Thank you.

Henro

• Next message: CCIE Sec: "Track the interface by the CRC or errors"
• Previous message: Darby Weaver: "Re: TCL Script"
• Maybe in reply to: henro: "VLAN over switch routed port (WAN)"
• Next in thread: Donghai Zhang: "Re: VLAN over switch routed port (WAN)"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST