From: Roberto Clavero Montano (Roberto.Clavero@TELINDUS.ES)
Date: Mon Dec 10 2007 - 12:41:04 ART
Hi Syed,
The most probable answer is because the destinations are routed by ASICS at the same hardware instead of switched by main processor, so you will not see this traffic. In order to see it, you can disable "ip cef" and then everything should be routed and delete all dynamic mac entries.
Rgds,
Roberto
Please could you confirm it to me if I'm right?
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de Syed Ali
Enviado el: lunes, 10 de diciembre de 2007 16:04
Para: ccielab@groupstudy.com
Asunto: SPAN
Hi All,
I am working SPAN. I notice when you do
Monitor session 1 source vlan 10 rx
Monitor session 1 detination int f0/0
And when you ping within this vlan 10 that is from 10.0.0.1 to 10.0.0.2, it
does NOT send anything to the destination port. But when you ping
255.255.255.255 I can receive the traffic on the destination port. Why is
so?
-I
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:30 ARST