From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Thu Dec 20 2007 - 13:51:59 ART
Keith,
All the interfaces re not passive by default.
This command will only show if you have "passive-interface default" entered
in first and not "default passive-interface default".
HTH,
Joseph.
On Dec 20, 2007 8:03 PM, keith tokash <ktokash@hotmail.com> wrote:
> I have a weird situation, maybe someone here can enlighten me as to
> whether
> I'm missing something or ran across a bug (typically it's the former).
>
> Rack1R1(config)#router rip
> Rack1R1(config-router)#default passive-interface default
> Rack1R1(config-router)#no passive-interface Ethernet0/0
> Rack1R1(config-router)#do sh run | i passive
> Rack1R1(config-router)#
>
>
> The router appears to have eaten my commands.
>
>
> With a few exceptions, secrecy is deeply incompatible with democracy and
> with
> science.
> --Carl Sagan
> _________________________________________________________________
> Share life as it happens with the new Windows Live.
>
> http://www.windowslive.com/share.html?ocid=TXT_TAGHM_Wave2_sharelife_122007
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST