From: shiran guez (shiranp3@gmail.com)
Date: Tue Feb 05 2008 - 07:34:03 ARST
if you want to be able to make a neighbor relationship then ip ospf network
non-broadcast
but if you do not need to have neighbors then passive interface will work
also
passive interface in OSPF will not only stop hello to be sent out like in
RIP it will also stop receiving hello so the result is that you will not be
able to form a neighbor with a passive interface.
On Feb 5, 2008 6:20 AM, <maritpra@hotmail.com> wrote:
> Hello,
>
> To disable OSPF hello out of Ethernet Interface, can we do like this?
>
> 1) Use "passive interface e0/0"
>
> or
>
> 2) Use "ip ospf network non-broadcast" under e0/0 interface
>
> Which one is correct or both?
>
> - From my testing, I did both then debug and found out that both disable
> hello packets, so i would like to know your guy oppinoin becasue some WB
> refered to only 1) as correct answer.
>
> Regard,
> Marit
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Shiran Guez MCSE CCNP NCE1 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:47 ARST