From: Bruce Porcelli (bruce.porcelli@yahoo.com)
Date: Mon Feb 25 2008 - 08:45:18 ARST
Maybe try putting a value next to your ebgp-multi hop command,
Not sure how many hops the two are from eachother, in that case, go with 255..
hope that helps
Matt Bentley <mattdbentley@gmail.com> wrote:
I thought I had a really good understanding of this, but it seems I am
wrong.
I have a BGP neighbor relationship between two devices
R1 (1.1.1.1) -------------> R2 (1.1.1.2)
R1 Fa0/1 connects to R2 Fa0/1
Underlying protocol for BGP transport is EIGRP
R1 Config:
router bgp 1
bgp router-id 1.1.1.1
neighbor 1.1.1.2 remote-as 2
neighbor 1.1.1.2 update-source l0
neighbor 1.1.1.2 ebgp-multihop
!
int l0
ip add 11.11.11.11 255.255.255.0
R2:
router bgp 2
bgp router-id 2.2.2.2
neighbor 1.1.1.1 remote-as 1
neighbor 1.1.1.1 update-source l0
neighbor 1.1.1.2 ebgp-multihop
!
ip add 12.12.12.12 255.255.255.0
!
I can ping both the IP addresses as well as the loopback addresses. If I
bring the neighbor relationship up first, and then issue the update-source
option, it doesn't kill the neighbor relatinoship, however, if I bounce the
interfaces, it gives the following debug. What am I missing?
*Mar 1 00:03:43.819: BGP: 1.1.1.1 open active, local address 12.12.12.12
*Mar 1 00:03:43.819: BGP: 1.1.1.1 read request no-op
*Mar 1 00:03:43.819: BGP: 1.1.1.1 open failed: Connection refused by remote
host, open active delayed 14770ms (35000ms max, 60% jitter)
---------------------------------
Never miss a thing. Make Yahoo your homepage.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2008 - 16:54:49 ARST