From: ahmed badr (eng.ahmedbadr@gmail.com)
Date: Wed Mar 05 2008 - 19:08:06 ARST
Thanks Mounir and Patrick. I'm reading it right now from the DocCD.
On 05/03/2008, Patrick Galligan <pgalligan@gmail.com> wrote:
> On Wed, Mar 5, 2008 at 2:33 PM, ahmed badr <eng.ahmedbadr@gmail.com> wrote:
> > Well, The Blueprint mentioned general topics not the tools.
> > I'm reading Cisco's official exam certification guide and it only
> > mentioned the new tools, stressing on that the previous tools are
> > legacy and didn't mention how to configure them.
> >
>
> Ahmed
>
> The only reference you'll have access to in the exam is the Cisco
> Documentation (DocCD). If it's in the documentation, you may or may
> not be asked to configure it. I know that's pretty vague, but that's
> how it is. Just make sure you know where to find stuff on the DocCD,
> and have looked through most of it so you have a general idea on how
> everything, including the legacy stuff, works. Then, even if it's
> something you haven't used much, you should be able to get it going.
>
> HTH
>
> Cheers,
> Pat
This archive was generated by hypermail 2.1.4 : Tue Apr 01 2008 - 07:53:52 ART