From: Ferreira, Marina (marina.ferreira@eds.com)
Date: Sun Apr 06 2008 - 10:50:33 ART
also, before you start creating vlans in vlan database, in conf mode issue:
vtp file nvram:vlan.dat
now, concerning L3 etherchannels, those I am unable to work. Appreciate any
inputs on that too.
________________________________
From: nobody@groupstudy.com on behalf of theKonqueror
Sent: Sun 6/4/2008 07:01
To: Kiran Parashare
Cc: Cisco certification
Subject: Re: Dymanmips
You can configure Vlans, VTP, L2 and L3 etherchannels, L3 switcihng under
dynamips. Dot1QinQ tunnels are not supported in dynamips though.
To configure Vlans and VTP, you need to go to vlan database.
Thanks,
Rahul
On Sun, Apr 6, 2008 at 12:33 PM, Kiran Parashare <kiran.ccie@gmail.com>
wrote:
> Hello GS,
>
> Sorry!!! as this might be repeated Question...
>
> What are the switching things which not works in Dynamips?
> Vlan,VTP,Private
> Vlan,EtherChannel etc..
>
> If those things not works in Dynamips then how to proceed further for IEWB
> labs ( I am new for IEWB in Dyanmips).
>
> Please let me know how to start IEWB in Dynamips..Confused !!!
>
> Thanks in Advance...
>
> Kind-Regards,
> Kiran
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Bugs can neither be created nor be removed from software by a developer. They can only be converted from one form to another. The total number of bugs in the software always remain constant..}l}..}l}.
This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART