EtherChannel Query

From: Z Linux (z.linux@hotmail.com)
Date: Mon Apr 07 2008 - 05:23:31 ART

• Next message: Paul Cosgrove: "Re: ISL Trunks"
• Previous message: Z Linux: "ISL Trunks"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

Is this correct Solution()

<< Question >>
Configure L2 Etherchannel between SW1 & Sw3 with number 13 as access ports on
VLAN_13SW3 must negotiate with SW1 using IEEE ProtocolSW1 must be reacting
hereupon then must establish EtherChannel with SW2

<<SOLUTION >>
Sw1interface range fa 0/13 -14channel-group 13 mode passive
interface port-channel 13switchport mode accessswitchport access vlan 13
Sw3interface range fa 0/13 -14channel-group 13 mode active
interface port-channel 13switchport mode accessswitchport access vlan 13

• Next message: Paul Cosgrove: "Re: ISL Trunks"
• Previous message: Z Linux: "ISL Trunks"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu May 01 2008 - 08:25:50 ART