From: Joseph Saad (joseph.samir.saad@gmail.com)
Date: Sat May 03 2008 - 07:59:51 ART
on SW1, you are load balancing traffic returning from the Server to hosts.
Assuming all are in VLAN X, then SW1 I'd configure load-balance based on Dst
Mac.
However, on SW2, you ideally want to load balance traffic destined to
server, then on SW2 I'd configure load-balance based on Src Mac or IP.
Load balancing configuration are locally significant and impact the traffic
one way only (while exiting the switch via port channel).
Joseph Saad
#20243.
On Sat, May 3, 2008 at 2:14 PM, ccie champ <ccie.champ@gmail.com> wrote:
> Hi all GS experts,
>
> 1. There is a server connected to SW1 and there is a vlan X on SW2 where
> multiple hosts exist
> 2. Both of them are connected using Layer 2 port-channel
>
> Incase, if users in VLAN X access server resources very frequently and we
> need to enable load balancing on port-channel
>
> I feel enabling *"dst mac"* based load balancing on *SW1* is just enough
>
> Any comments, am i right?
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:15 ART