From: Julio Carrasco (julio.carrasco@ya.com)
Date: Sat May 17 2008 - 15:35:55 ART
Thanks for the quick answer, you are right ;).
I thought I removed the maps with the "clear frame inarp" command, but it
didn4t work. It usually work well with real routers.
Thanks again.
----- Original Message -----
From: "Dale Kling" <dalek77@gmail.com>
To: "Julio Carrasco" <julio.carrasco@ya.com>
Cc: <ccielab@groupstudy.com>
Sent: Saturday, May 17, 2008 8:20 PM
Subject: Re: IEWB Dynamips LAB1 EIGRP neighboring error (Task 3.6)
> Check to see if you have dynamic Frame relay mappings on R1 and R3 between
> the two with "sh frame-relay map." You might have forgotten to clear them
> with "clear frame inarp" command. Whenever you have a lab that put the
> encap frame under the serial interface for you already, you have to always
> be sure to clear the dynamic maps and verify with "sh frame map" that
> they're gone.
>
> HTH,
>
> Dale
>
>
> On Sat, May 17, 2008 at 2:16 PM, Julio Carrasco <julio.carrasco@ya.com>
> wrote:
>
>> Hello all,
>>
>> I am having problems with the conectivity, cause R3 is trying to form an
>> EIGRP
>> neighborship with R1 ( , and router are not passing from R3 to R1 (but
>> are
>> passing from R1 to R3).
>>
>> *Mar 1 01:09:54.083: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.123.1
>> (Serial1/0) is down: retry limit exceeded
>> Rack1R3#
>> *Mar 1 01:10:40.275: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
>> 183.1.123.1
>> (Serial1/0) is up: new adjacency
>>
>> Do anyone knows why is R3 trying to become a neighbor of R1 ??
>>
>> R2 is the hub, R1 and R3 are the spokes.
>>
>> FR Link
>> FR Link
>>
>> R1------------------------------------------------------------------------R2-
>>
>> -----------------------------------------------------------------------------
>> -R3
>> .1 DLCI 102 DLCI 201 .2 DLCI
>> 203
>> DLCI 302 .3
>>
>> Net 183.1.123.0/24
>>
>> ANd the config of the routers is as follows
>>
>> R1:
>>
>> interface Serial1/0
>> ip address 183.1.123.1 255.255.255.0
>> encapsulation frame-relay
>> serial restart-delay 0
>> no dce-terminal-timing-enable
>> frame-relay map ip 183.1.123.2 102 broadcast
>> frame-relay map ip 183.1.123.3 102
>> no frame-relay inverse-arp
>> !
>> router eigrp 100
>> network 150.1.1.1 0.0.0.0
>> network 183.1.17.1 0.0.0.0
>> network 183.1.123.1 0.0.0.0
>> no auto-summary
>> !
>> !
>>
>>
>> R2:
>>
>> interface Serial1/0
>> ip address 183.1.123.2 255.255.255.0
>> encapsulation frame-relay
>> no ip split-horizon eigrp 100
>> serial restart-delay 0
>> no dce-terminal-timing-enable
>> frame-relay map ip 183.1.123.1 201 broadcast
>> frame-relay map ip 183.1.123.3 203 broadcast
>> no frame-relay inverse-arp
>> !
>> router eigrp 100
>> network 150.1.2.2 0.0.0.0
>> network 183.1.28.2 0.0.0.0
>> network 183.1.123.2 0.0.0.0
>> no auto-summary
>> !
>> !
>>
>> R3:
>>
>> interface Serial1/0
>> ip address 183.1.123.3 255.255.255.0
>> encapsulation frame-relay
>> ip ospf network broadcast
>> ip ospf priority 0
>> serial restart-delay 0
>> no dce-terminal-timing-enable
>> frame-relay map ip 183.1.123.1 302
>> frame-relay map ip 183.1.123.2 302 broadcast
>> no frame-relay inverse-arp
>> !
>> router eigrp 100
>> redistribute connected route-map CON->EIGRP
>> redistribute ospf 1
>> network 183.1.123.3 0.0.0.0
>> no auto-summary
>> !
>> !
>>
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:17 ART