From: Thomas Fowles (tfowles@gmail.com)
Date: Fri Jun 06 2008 - 20:50:28 ART
If this is a production network and you are not looking to use a specific
feature of the 4.0(1) code, I would suggest going with the latest
safe-harbor release, 3.2(4) & 12.2(18)SXF11.
Here's the safe-harbor testing site link:
http://www.cisco.com/en/US/customer/solutions/ns340/ns414/ns504/networking_solutions_products_genericcontent0900aecd80694a2a.html
4.x is slated for testing in August.
HTH
-Tom
CCIE#18762
http://www.linkedin.com/in/thomasfowles
On Fri, Jun 6, 2008 at 12:50 PM, Curt Gregg (cugregg) <cugregg@cisco.com>
wrote:
> I would also check to see if you need to upgrade the maintenance
> partition. Jumping from 2.3 to 3.1 required a maintenance partition
> upgrade. Check the release notes.
>
> But yeah 4.0.1 should be the latest.
>
> Curt
> CCIE 18444
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Anh Khoa Le Viet
> Sent: Friday, June 06, 2008 12:19 PM
> To: kang lee
> Cc: ccielab@groupstudy.com
> Subject: Re: FWSM Software
>
> Hi,
>
> As I know that the latest software for FWSM is 4.0(1) which was released
> on 13-MAY-2008 ( you can check in
> http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-fwsm)
> I've tried with a 7609 box and everything is OK.
>
> Try these below web pages for upgrading FWSM:
> http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note
> 09186a0080531753.shtml<http://www.cisco.com/en/US/products/hw/modules/ps2706/products_tech_note09186a0080531753.shtml>
> http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmr
> n40.html#wp161551<http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html#wp161551>
> http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/configuration/guide
> /swcnfg_f.html#wp1057450<http://www.cisco.com/en/US/docs/security/fwsm/fwsm31/configuration/guide/swcnfg_f.html#wp1057450>
>
> Hope it help.
>
> Regards,
> Khoa Le
>
> On Fri, Jun 6, 2008 at 9:55 AM, kang lee <kanghlee@gmail.com> wrote:
>
> > GS,
> >
> > Does anyone knows what is the latest OS for FWSM for Catalyst 6500
> > serious and have any issues to upgrade from 3.1? I have failover unit
> > on the same chassis.
> >
> > Any comment or tip might be helpful.
> >
> > thanks
> >
> >
> > ______________________________________________________________________
> > _ Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART