12.4.15T3 ip route-cache flow problem

From: Jason Aarons (jaarons@hotmail.com)
Date: Sun Jun 15 2008 - 13:36:11 ART

• Next message: ahmet seckin: "Re: 10 terminal windows shortcuts on desktop."
• Previous message: Narbik Kocharians: "Re: coffee"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I ran extensive debugs but traffic wasn't flowing across WAN to FastEthernet
interfaces until I removed ip route-cache flow. IOS is 12.4.15T3. I could
telnet to serial interface, etc but not to the FastEthernet interfaces, etc.
We have 2 CCIEs look at it and we couldn't find a cause other than removing
the command resolved the issue. Even with reboot it wouldn't pass traffic.

I didn't find any bugs in toolkit, I have about 20 other sites setup identical
with ip route-cache flow on the serial interface.

Are there any specific debugs we could have missed to view if route-cache flow
is having problems, etc.

interface Serial0/0/0:0 no ip address encapsulation frame-relay IETF ip
route-cache flow no fair-queue frame-relay lmi-type ansi

• Next message: ahmet seckin: "Re: 10 terminal windows shortcuts on desktop."
• Previous message: Narbik Kocharians: "Re: coffee"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Jul 01 2008 - 06:23:21 ART