From: Fahad Khan (fahad.khan@gmail.com)
Date: Wed Jul 09 2008 - 09:35:09 ART
Its does not occur normaly. The router, on which you configure EIGRP to OSPF
reditribution, will redistribute its connected networks (on which EIGRP
process is running) into OSPF by default. if you have such secnario,
1.1.1.1/8 (lo0)--R1--(s1/0)
10.0.0.1/8----------10.0.0.2/8(s1/0)R2--(lo0)2.2.2.2/8
On R1:
router ospf 1
redistribute eigrp 100 subnets
network 10.0.0.0 0.255.255.255 area 0
On R2 :
R2# sh ip route
-----output omitted----
Gateway of last resort is not set
O E2 2.0.0.0/8 [110/20] via 10.0.0.1, 00:10:32, Serial1/0
C 2.0.0.0/8 is directly connected, Loopback0
C 10.0.0.0/8 is directly connected, Serial1/0
Behind your command " redistribute eigrp 100 subnets", the router R1 creates
a route-map for matching interafces running eigrp and redistributes
connected by default.
I am sorry , if i got your question wrong.
Thanks and regards,
On Tue, Jul 8, 2008 at 3:50 AM, akyccie <akyccie@gmail.com> wrote:
> I notice that the connected interface part of eigrp process dosn't get
> advertise to OSPF when you redistripute eigrp to ospf. Is it the normal
> behaviour.
>
> what is the workaround here, redistribute connected ??
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
-- FAHAD KHAN
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART