From: Scott Morris (smorris@internetworkexpert.com)
Date: Sun Jul 13 2008 - 12:11:37 ART
Well, you can use "show ip bgp" to be sure the route is in your local table
first.
Then I'd use "show ip bgp neigh (ip#) advertise" to see what routes you are
sending to that neighbor.
After that, you need to check the other side to make sure it's being
accepted.
HTH,
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344
Online Community: http://www.IEOC.com
CCIE Blog: http://blog.internetworkexpert.com
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of ccie
Sent: Sunday, July 13, 2008 7:37 AM
To: ccielab@groupstudy.com
Subject: How I could verify which particular router has been send to a
certain BGP neighbor?
Hi experts,
How I could verify which particular router has been send to a certain BGP
neighbor?
Regards,
Amin
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART