From: Matt Sherman (matt.sherman2@gmail.com)
Date: Sun Jul 13 2008 - 20:31:19 ART
Thanks for the response.  Ive verified what you mentioned.  The gateway
setting is one of the requirements but for now I cant ping SW2 which is the
gateway so it wont do me any good.  I love Dynamips but sometimes Im not
sure if its a config problem or a Dynamips bug.
SW2#sh vlan-switch
VLAN Name                             Status    Ports
---- -------------------------------- ---------
-------------------------------
1    default                          active    Fa1/1, Fa1/3, Fa1/5, Fa1/13
                                                Fa1/14, Fa1/15
6    VLAN0006                         active
8    VLAN0008                         active
12   VLAN_AB                          active    Fa1/0
36   VLAN0036                         active    Fa1/6
43   VLAN0043                         active
45   VLAN_DE                          active    Fa1/4
55   VLAN0055                         active
88   VLAN0088                         active
255  VLAN0255                         active
258  VLAN0258                         active    Fa1/2
1002 fddi-default                     active
1003 token-ring-default               active
1004 fddinet-default                  active
1005 trnet-default                    active
SW4#sh vlan-switch
VLAN Name                             Status    Ports
---- -------------------------------- ---------
-------------------------------
1    default                          active    Fa1/0, Fa1/1, Fa1/2, Fa1/3
                                                Fa1/5, Fa1/8, Fa1/9, Fa1/10
                                                Fa1/11, Fa1/12
6    VLAN0006                         active    Fa1/6
8    VLAN0008                         active
12   VLAN_AB                          active
36   VLAN0036                         active
43   VLAN0043                         active    Fa1/4
45   VLAN_DE                          active
55   VLAN0055                         active
88   VLAN0088                         active
255  VLAN0255                         active
258  VLAN0258                         active
1002 fddi-default                     active
1003 token-ring-default               active
1004 fddinet-default                  active
1005 trnet-default                    active
SW3#sh vlan-switch
*Mar  1 13:01:59.608: %SYS-5-CONFIG_I: Configured from console by console
SW3#sh vlan-switch
VLAN Name                             Status    Ports
---- -------------------------------- ---------
-------------------------------
1    default                          active    Fa1/1, Fa1/2, Fa1/4, Fa1/6
                                                Fa1/7, Fa1/8, Fa1/9
6    VLAN0006                         active
8    VLAN0008                         active
12   VLAN_AB                          active
36   VLAN0036                         active    Fa1/3
43   VLAN0043                         active    Fa1/0
45   VLAN_DE                          active
55   VLAN0055                         active
88   VLAN0088                         active
255  VLAN0255                         active
258  VLAN0258                         active    Fa1/5
1002 fddi-default                     active
1003 token-ring-default               active
1004 fddinet-default                  active
1005 trnet-default                    active
====================================================================
SW2#sh int trunk
Port      Mode         Encapsulation  Status        Native vlan
Fa1/7     on           802.1q         trunking      1
Fa1/8     on           802.1q         trunking      1
Fa1/9     on           802.1q         trunking      1
Fa1/10    on           802.1q         trunking      1
Fa1/11    on           802.1q         trunking      1
Fa1/12    on           802.1q         trunking      1
Port      Vlans allowed on trunk
Fa1/7     1-1005
Fa1/8     1-1005
Fa1/9     1-1005
Fa1/10    1-1005
Fa1/11    1-1005
Fa1/12    1-1005
Port      Vlans allowed and active in management domain
Fa1/7     1,6-8,12,36,43,45,55,77,88,255,258
Fa1/8     1,6-8,12,36,43,45,55,77,88,255,258
Fa1/9     1,6-8,12,36,43,45,55,77,88,255,258
Fa1/10    1,6-8,12,36,43,45,55,77,88,255,258
Fa1/11    1,6-8,12,36,43,45,55,77,88,255,258
Port      Vlans allowed and active in management domain
Fa1/12    1,6-8,12,36,43,45,55,77,88,255,258
Port      Vlans in spanning tree forwarding state and not pruned
Fa1/7     1,6-8,12,36,43,45,55,77,88,255
Fa1/8     45,55
Fa1/9     45,55
Fa1/10    1,36,43,45,55,255,258
Fa1/11    1,45,55
Fa1/12    1,45,55
SW3#show int trunk
Port      Mode         Encapsulation  Status        Native vlan
Fa1/10    on           802.1q         trunking      255
Fa1/11    on           802.1q         trunking      255
Fa1/12    on           802.1q         trunking      255
Fa1/13    on           802.1q         trunking      255
Fa1/14    on           802.1q         trunking      255
Fa1/15    on           802.1q         trunking      255
Port      Vlans allowed on trunk
Fa1/10    1-1005
Fa1/11    1-1005
Fa1/12    1-1005
Fa1/13    1-1005
Fa1/14    1-1005
Fa1/15    1-1005
Port      Vlans allowed and active in management domain
Fa1/10    1,6,8,12,36,43,45,55,88,255,258
Fa1/11    1,6,8,12,36,43,45,55,88,255,258
Fa1/12    1,6,8,12,36,43,45,55,88,255,258
Fa1/13    1,6,8,12,36,43,45,55,88,255,258
Fa1/14    1,6,8,12,36,43,45,55,88,255,258
Fa1/15    1,6,8,12,36,43,45,55,88,255,258
Port      Vlans in spanning tree forwarding state and not pruned
Fa1/10    1,6,8,12,36,43,45,55,88,255,258
Fa1/11    45,55
Fa1/12    45,55
Fa1/13    45,55
Fa1/14    45,55
Fa1/15    45,55,258
SW4#show int trunk
Port      Mode         Encapsulation  Status        Native vlan
Fa1/7     on           802.1q         trunking      255
Fa1/13    on           802.1q         trunking      255
Fa1/14    on           802.1q         trunking      255
Fa1/15    on           802.1q         trunking      255
Port      Vlans allowed on trunk
Fa1/7     1-1005
Fa1/13    1-1005
Fa1/14    1-1005
Fa1/15    1-1005
Port      Vlans allowed and active in management domain
Fa1/7     1,6,8,12,36,43,45,55,88,255,258
Fa1/13    1,6,8,12,36,43,45,55,88,255,258
Fa1/14    1,6,8,12,36,43,45,55,88,255,258
Fa1/15    1,6,8,12,36,43,45,55,88,255,258
Port      Vlans in spanning tree forwarding state and not pruned
Fa1/7     1,6,8,12,36,43,45,55,88,255,258
Fa1/13    1,45,55
Fa1/14    1,45,55
Fa1/15    1,45,55,258
=====================================================
SW2#sh spanning-tree vlan 255 br
VLAN255
  Spanning tree enabled protocol ieee
  Root ID    Priority    8192
             Address     cc07.15f0.000a
             This bridge is the root
             Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
  Bridge ID  Priority    8192
             Address     cc07.15f0.000a
             Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
             Aging Time 300
Interface                                   Designated
Name                 Port ID Prio Cost  Sts Cost  Bridge ID            Port
ID
-------------------- ------- ---- ----- --- ----- --------------------
-------
FastEthernet1/7      128.48   128    19 FWD     0  8192 cc07.15f0.000a
128.48
FastEthernet1/8      128.49   128    19 FWD     0  8192 cc07.15f0.000a
128.49
FastEthernet1/9      128.50   128    19 FWD     0  8192 cc07.15f0.000a
128.50
FastEthernet1/10     128.51   128    19 FWD     0  8192 cc07.15f0.000a
128.51
FastEthernet1/11     128.52   128    19 FWD     0  8192 cc07.15f0.000a
128.52
FastEthernet1/12     128.53   128    19 FWD     0  8192 cc07.15f0.000a
128.53
SW3#sh spanning-tree vlan 255 br
VLAN255
  Spanning tree enabled protocol ieee
  Root ID    Priority    8192
             Address     cc07.15f0.000a
             Cost        19
             Port        51 (FastEthernet1/10)
             Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
  Bridge ID  Priority    32768
             Address     cc08.15f0.000a
             Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
             Aging Time 300
Interface                                   Designated
Name                 Port ID Prio Cost  Sts Cost  Bridge ID            Port
ID
-------------------- ------- ---- ----- --- ----- --------------------
-------
FastEthernet1/10     128.51   128    19 FWD     0  8192 cc07.15f0.000a
128.51
FastEthernet1/11     128.52   128    19 BLK     0  8192 cc07.15f0.000a
128.52
FastEthernet1/12     128.53   128    19 BLK     0  8192 cc07.15f0.000a
128.53
FastEthernet1/13     128.54   128    19 FWD    19 32768 cc08.15f0.000a
128.54
FastEthernet1/14     128.55   128    19 FWD    19 32768 cc08.15f0.000a
128.55
FastEthernet1/15     128.56   128    19 FWD    19 32768 cc08.15f0.000a
128.56
SW4#sh spanning-tree vlan 255 br
VLAN255
  Spanning tree enabled protocol ieee
  Root ID    Priority    8192
             Address     cc07.15f0.000a
             Cost        38
             Port        48 (FastEthernet1/7)
             Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
  Bridge ID  Priority    32768
             Address     cc09.15f0.000a
             Hello Time   2 sec  Max Age 20 sec  Forward Delay 15 sec
             Aging Time 300
Interface                                   Designated
Name                 Port ID Prio Cost  Sts Cost  Bridge ID            Port
ID
-------------------- ------- ---- ----- --- ----- --------------------
-------
FastEthernet1/7      128.48   128    19 FWD    19 32768 cc06.1498.000a
128.54
FastEthernet1/13     128.54   128    19 BLK    19 32768 cc08.15f0.000a
128.54
FastEthernet1/14     128.55   128    19 BLK    19 32768 cc08.15f0.000a
128.55
FastEthernet1/15     128.56   128    19 BLK    19 32768 cc08.15f0.000a
128.56
=====================================================
SW2#sr int vlan 255
Building configuration...
Current configuration : 63 bytes
!
interface Vlan255
 ip address 141.1.255.8 255.255.255.0
SW3#sr int vlan 255
Building configuration...
Current configuration : 102 bytes
!
interface Vlan255
 ip address 141.1.255.9 255.255.255.0
 no ip route-cache
 ip ospf priority 0
end
SW4#sr int vla255
Building configuration...
Current configuration : 84 bytes
!
interface Vlan255
 ip address 141.1.255.10 255.255.255.0
 ip ospf priority 0
   _____
From: Jonathan Greenwood II [mailto:gwood83@gmail.com]
Sent: Sunday, July 13, 2008 3:03 PM
To: Matt Sherman
Cc: ccielab@groupstudy.com
Subject: Re: Intra-VLAN connectivity - IEWB lab 4 (dynamips workbook)
Ip routing doesn't need to be enabled.  You need to use the ip
default-gateway for the 2 client switches pointing to the main Switch and
make sure the SVI's are created on all 3 switches.  Also make sure your
trunking is working and just ping it should work.  Maybe post your config to
have a look if that doesn't work.
On Sun, Jul 13, 2008 at 12:58 PM, Matt Sherman <HYPERLINK
"mailto:matt.sherman2@gmail.com"matt.sherman2@gmail.com> wrote:
Hi,
The lab scenario I have is three switches, each with their own vlan 255
interface.  All other VLANs are working that have routers plugged into
access ports.  I see VLAN 255 as active on each switch and it shows up on
the trunks but there the local VLAN 255 interface cannot ping any of the
other switch s VLAN 255 interfaces.  ARP requests fail.  Can anyone tell me
what I m doing wrong?
Thanks,
Matt
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 270.4.10/1549 - Release Date: 7/12/2008
4:31 PM
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:54 ART