From: andrea gentile (andreagentile71@gmail.com)
Date: Sun Jul 27 2008 - 05:37:07 ART
try :
line 1 16
no exec
this will stop "rogue exec"
i had the same problem, found the solution on Chris Bryant site
2008/7/26 Hobbs <deadheadblues@gmail.com>
> Hello,
>
> When I log on to my terminal server (2511) I have to clear lines multiple
> times in order to reverse telnet into each device. It keeps saying
> connection refused by remote host. It seems to progressively get worse
> after
> each time I boot up. Has anyone had this problem or know a solution? I
> tried
> using flow control hardware, but sometimes that just freezes the terminal
> in
> some routers, specifically the 2500 BB routers.
>
> Here is my line config:
>
> line con 0
> exec-timeout 0 0
> logging synchronous
> transport input none
> line 1 16
> exec-timeout 0 0
> transport input all
> stopbits 1
> line aux 0
> line vty 0 4
> exec-timeout 0 0
> privilege level 15
> password cisco
> logging synchronous
> login
> line vty 5 15
> privilege level 15
> password cisco
> login
>
> Thanks,
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Aug 04 2008 - 06:11:57 ART