From: darth router (darklordrouter@gmail.com)
Date: Mon Aug 18 2008 - 15:11:32 ART
Ok funky,
So I go in and manually edit mine:
1:102:0 = 2:201:0
2:201:0 = 1:102:0
To yours:
1:0:102 = 2:0:201
And it works! But what's the deal? If you add 1:0:102 = 2:0:201 in the GSN 3
GUI, it actually creates both entries in the net file like, :
1:102:0 = 2:201:0
2:201:0 = 1:102:0
On Mon, Aug 18, 2008 at 9:45 AM, darth router <darklordrouter@gmail.com>wrote:
> Thanks bro,
>
> Yea, something is screwy here. This doesn't work either. I can't ping
> across. Here's the netfile GNS3 creates when I built what you showed me.
> Look like it should?
>
> autostart = False
> [localhost:7200]
> workingdir = C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
> [[7200]]
> image = Z:\GNS3\images\c7200-adventerprisek9-mz.124-4.T3.bin
> ghostios = True
> [[ROUTER R6]]
> console = 2002
> slot4 = PA-A1
> a4/0 = ATM 1
> x = -254.0
> y = -96.0
> [[ATMSW ATM]]
> 1:102:0 = 2:201:0
> 2:201:0 = 1:102:0
> x = -84.5
> y = -161.5
> [[ROUTER R8]]
> console = 2003
> slot4 = PA-A1
> a4/0 = ATM 2
> x = 89.0
> y = -101.0
>
>
> On Mon, Aug 18, 2008 at 5:38 AM, backbone systems <
> backbone.systems@gmail.com> wrote:
>
>> Check this out.. All for Dynamips
>>
>> R6:
>>
>> interface ATM4/0
>> no ip address
>> no atm ilmi-keepalive
>> !
>> interface ATM4/0.1 point-to-point
>>
>> ip address 12.12.12.1 255.255.255.0
>> pvc 0/102
>> !
>>
>> R8
>> interface ATM4/0
>> no ip address
>> no atm ilmi-keepalive
>> !
>> interface ATM4/0.1 point-to-point
>>
>> ip address 12.12.12.2 255.255.255.0
>> pvc 0/201
>> !
>>
>>
>> NET file
>> [[Router R6]]
>> model = 7200
>> autostart = false
>> slot4 = PA-A1
>> A4/0 = ATMSW-1 1
>>
>>
>> [[Router R8]]
>> model = 7200
>> autostart = false
>> slot4 = PA-A1
>> A4/0 = ATMSW-1 2
>>
>>
>>
>>
>> [[ATMSW ATMSW-1]]
>>
>> 1:0:102 = 2:0:201
>>
>>
>>
>>
>>
>> BACK to BACk
>>
>> R1:
>>
>> !
>> interface ATM4/0
>> no ip address
>> no atm enable-ilmi-trap
>> no clns route-cache
>> no shut
>>
>> !
>> interface ATM4/0.1 point-to-point
>> ip address 12.12.12.1 255.255.255.0
>> no atm enable-ilmi-trap
>> pvc 0/100
>> !
>> !
>>
>> R2:
>>
>> !
>> interface ATM4/0
>> no ip address
>> no atm enable-ilmi-trap
>> no clns route-cache
>> no shut
>> !
>> interface ATM4/0.1 point-to-point
>> ip address 12.12.12.2 255.255.255.0
>> no atm enable-ilmi-trap
>> pvc 0/100
>> !
>> !
>>
>> On Mon, Aug 18, 2008 at 2:05 PM, darth router <darklordrouter@gmail.com>
>> wrote:
>> > Sup yalls,
>> >
>> > I can't even get the most basic of ATM scenarios working for some
>> reason.
>> > I'm not sure if it's dynamips (latest GS3), or me being a complete
>> bonehead
>> > with ATM. Can someone whip up a two router ATM config (net file and
>> configs)
>> > in GNS3 (working please) and post it here, so I can test with it? I
>> don't
>> > care if it's multipoint, point to point, on the main interface, etc..
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART