From: Antonio Soares (amsoares@netcabo.pt)
Date: Tue Sep 23 2008 - 21:52:53 ART
Now available:
- Interworking: Ethernet-to-VLAN using AToM (bridged) IPv4+IPv6 OK
- Interworking: Ethernet-to-VLAN using AToM (routed) IPv4 OK
- Interworking: FR-to-VLAN using AToM (bridged) DOES NOT WORK
- Interworking: FR-to-VLAN using AToM (routed) IPv4 OK
- Interworking: PPP-to-VLAN using AToM (bridged) DOES NOT WORK
- Interworking: PPP-to-VLAN using AToM (routed) IPv4 OK
- Interworking: ATM-to-VLAN using AToM (bridged) NOT POSSIBLE TO ACHIEVE
WITH DYNAMIPS
- Interworking: ATM-to-VLAN using AToM (routed) NOT POSSIBLE TO ACHIEVE
DYNAMIPS
- Interworking: FR-to-PPP using AToM (bridged) DOES NOT WORK
- Interworking: FR-to-PPP using AToM (routed) IPv4 OK
- Interworking: FR-to-ATM using AToM (bridged) NOT POSSIBLE TO ACHIEVE
DYNAMIPS
- Interworking: FR-to-ATM using AToM (routed) NOT POSSIBLE TO ACHIEVE
DYNAMIPS
- Interworking: PPP-to-ATM using AToM (bridged)
- Interworking: PPP-to-ATM using AToM (routed)
Notes:
- "DOES NOT WORK" - the feature is not supported or other unknown reason.
- "NOT POSSIBLE TO ACHIEVE DYNAMIPS" - because dynamips only supports the
PA-A1.
- IPv6 was used to check the difference between bridged and routed modes.
http://pwp.netcabo.pt/amsoares/dynamips/dynamips.htm
Regards,
Antonio Soares, CCIE #18473 (R&S)
amsoares@netcabo.pt
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART