From: Hobbs (deadheadblues@gmail.com)
Date: Thu Sep 25 2008 - 19:42:29 ART
LOL. i'll keep that one a secret ;). I removed it by shutting the interface
down, saving, reload, then remove and it works...very weird. I was showing
people at work and they were stumped too
On Thu, Sep 25, 2008 at 4:26 PM, Narbik Kocharians <narbikk@gmail.com>wrote:
> Change your vendor.... just kidding.. It could be your IOS
>
>
> On Thu, Sep 25, 2008 at 1:50 PM, Hobbs <deadheadblues@gmail.com> wrote:
>
>> Ok. This is getting ridiculous! I did this lab again today and it seems
>> to
>> be a bug on this router's interface only! I tried the default interface
>> command to no avail. F0/0 has no such problem. its only f0/1. Check it
>> out:
>>
>> R7#show run int f0/1
>> Building configuration...
>>
>> Current configuration : 145 bytes
>> !
>> interface FastEthernet0/1
>> ip address 150.100.221.7 255.255.255.0
>> duplex auto
>> speed auto
>> traffic-shape group 101 7000000 875000 0 1000
>> end
>>
>> R7#conf t
>> Enter configuration commands, one per line. End with CNTL/Z.
>> R7(config)#int f0/1
>> R7(config-if)#no traffic-shape group 101
>> R7(config-if)#exit
>> R7(config)#do show run int f0/1
>> Building configuration...
>>
>> Current configuration : 145 bytes
>> !
>> interface FastEthernet0/1
>> ip address 150.100.221.7 255.255.255.0
>> duplex auto
>> speed auto
>> traffic-shape group 101 7000000 875000 0 1000
>> end
>>
>> R7(config)#default interface f0/1
>> Building configuration...
>>
>> Interface FastEthernet0/1 set to default configuration
>> R7(config)#do show run int f0/1
>> *Sep 25 17:26:43.099: %OSPF-5-ADJCHG: Process 1, Nbr 200.0.0.5 on
>> FastEthernet0/1 from FULL to DOWN, Neighbor Down: Interface down or
>> detached
>> *Sep 25 17:26:43.099: %OSPF-5-ADJCHG: Process 1, Nbr 200.0.0.6 on
>> FastEthernet0/1 from FULL to DOWN, Neighbor Down: Interface down or
>> detached
>> Building configuration...
>>
>> Current configuration : 120 bytes
>> !
>> interface FastEthernet0/1
>> no ip address
>> duplex auto
>> speed auto
>> traffic-shape group 101 7000000 875000 0 1000
>> end
>>
>> R7(config)#
>>
>> Traffic-shape is still there!!
>>
>> On Mon, Sep 22, 2008 at 10:44 AM, Peter Wolter <
>> Peter.Wolter@foremostfarms.com> wrote:
>>
>> > Did you try default interface F0/0 command?
>> >
>> > I configured it on my router and i was able to negate it.
>> >
>> > On Sun, Sep 21, 2008 at 1:59 PM, Hobbs <deadheadblues@gmail.com> wrote:
>> >
>> > > fyi. I reloaded, it was still there. After reload I removed it, and it
>> > went
>> > > away.
>> > >
>> > > On Sun, Sep 21, 2008 at 2:39 PM, Hobbs <deadheadblues@gmail.com>
>> wrote:
>> > >
>> > > > Check this out, traffic-shape group 101 will not go away.
>> > > > What am I doing wrong?
>> > > >
>> > > > R7#show run int f0/0
>> > > > Building configuration...
>> > > >
>> > > > Current configuration : 155 bytes
>> > > > !
>> > > > interface FastEthernet0/0
>> > > > ip address 150.100.220.7 255.255.255.0
>> > > > duplex auto
>> > > > speed auto
>> > > > traffic-shape group 101 7000000 875000 0 1000
>> > > > end
>> > > >
>> > > > R7#
>> > > > R7#conf t
>> > > > Enter configuration commands, one per line. End with CNTL/Z.
>> > > > R7(config)#int f0/0
>> > > > *R7(config-if)#no traffic-shape group 101 7000000 875000 0 1000
>> > > > R7(config-if)#no traffic-shape group 101 *
>> > > > R7(config-if)#^Z
>> > > > R7#show run int f0/0
>> > > > Building configuration...
>> > > >
>> > > > Current configuration : 155 bytes
>> > > > !
>> > > > interface FastEthernet0/0
>> > > > ip address 150.100.220.7 255.255.255.0
>> > > > duplex auto
>> > > > speed auto
>> > > > traffic-shape group 101 7000000 875000 0 1000
>> > > > end
>> > > >
>> > > > I put this command on the wrong interface and I need to put MQC
>> here, I
>> > > > cant put MQC because I cant remove the traffic-shape.
>> > > >
>> > > > thanks,
>> > >
>> > >
>> > > Blogs and organic groups at http://www.ccie.net
>> > >
>> > >
>> _______________________________________________________________________
>> > > Subscription information may be found at:
>> > > http://www.groupstudy.com/list/CCIELab.html
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> > >
>> >
>> >
>> > --
>> > Narbik Kocharians
>> > CCSI#30832, CCIE# 12410 (R&S, SP, Security)
>> > www.MicronicsTraining
>> > www.Net-Workbooks.com <http://www.net-workbooks.com/>
>> > Sr. Technical Instructor
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Narbik Kocharians
> CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> www.MicronicsTraining
> www.Net-Workbooks.com
> Sr. Technical Instructor
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART