From: David Prall (dcp@dcptech.com)
Date: Mon Oct 20 2008 - 00:35:24 ARST
Use aaa and a particular group that is configured as none. Of course don't
forget to configure the default to use line.
David
-- http://dcp.dcptech.com > -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of > Hobbs > Sent: Sunday, October 19, 2008 10:00 PM > To: David Prall > Cc: Cisco certification > Subject: Re: can't copy from http, permission denied > > this is what I get: > > R7#telnet 200.0.0.8 80 > Trying 200.0.0.8, 80 ... Open > GET /test.html > WWW-Authenticate: Basic realm="level_15_access" > > 401 Unauthorized > > [Connection to 200.0.0.8 closed by foreign host] > R7# > > Looks like it has something to do with privilege level...I debug server > and > get this (yet auth is not configured) > > R8#debug ip http all > > R8# > *Oct 20 02:01:00.146: its_urlhook url: /test.html, method 1 > *Oct 20 02:01:00.146: lds_urlhook, url=/test.html > *Oct 20 02:01:00.158: Mon, 20 Oct 2008 02:01:00 GMT 150.100.178.7 > /test.html > auth_required > Method = GET > *Oct 20 02:01:00.158: > R8# > > > > On Sun, Oct 19, 2008 at 7:54 PM, David Prall <dcp@dcptech.com> wrote: > > > What does > > telnet 200.0.0.8 80 > > GET /test.html > > > > Give you. > > > > David > > > > -- > > http://dcp.dcptech.com > > > > > > > -----Original Message----- > > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On > Behalf Of > > > Hobbs > > > Sent: Sunday, October 19, 2008 9:10 PM > > > To: Cisco certification > > > Subject: can't copy from http, permission denied > > > > > > hello, > > > > > > I don't know what the freak I'm doing wrong. I can't get a file to > copy > > > via > > > http, it says "permission denied" on the server but I do not have > any > > > access-class or authentication enabled. R7 = client. R8 = server: > > > > > > R7---R8 > > > > > > R8: > > > > > > R8#dir flash:test.html > > > Directory of flash:/test.html > > > > > > 11 -rw- 2083 Oct 20 2008 00:31:54 +00:00 test.html > > > > > > 64016384 bytes total (19439616 bytes free) > > > > > > R8#show run | inc http > > > ip http server > > > no ip http secure-server > > > ip http path flash: > > > R8# > > > > > > R7: > > > > > > R7#copy http: flash: > > > Address or name of remote host [200.0.0.8]? > > > Source filename [test.html]? > > > Destination filename [test.html]? > > > %Error opening http://200.0.0.8/test.html (Permission denied) > > > R7# > > > > > > I don't have http authentication enabled on R8. I believe its > disabled > > > by > > > default, but I even did "no ip http auth" just in case. I dont have > any > > > ACL's on R7 to R8 interfaces. > > > > > > any ideas? thanks > > > > > > > > > Blogs and organic groups at http://www.ccie.net > > > > > > > _______________________________________________________________________ > > > Subscription information may be found at: > > > http://www.groupstudy.com/list/CCIELab.html > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.htmlBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST