From: Shahid Ansari (shahid1357@gmail.com)
Date: Tue Oct 28 2008 - 10:31:29 ARST
To enable MD5 authentication in BGP use Neighbor X.X.X.X password abcdef
command and surely they will give you password to assign it .There are few
labs in IE workbook which has the same solutions by using neighbor command
and (mentioned password is your key : P)
On Tue, Oct 28, 2008 at 2:24 PM, Shaughn Smith <maniac.smg@gmail.com> wrote:
> Hi all
>
> I am new to the list and will be doing my SP lab on the 5th of December
> Can you help me with the following question i got off one of my Practice
> Labs
>
> If you were asked to secure a InterAS BGP session with the most secure
> method possible would you use the neighbor x.x.x.x password x x x x x
> command or use an ACL on the two interfaces only allowing that BGP Peer to
> establish a session on tcp port 179 or use both options ?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Regards,Shahid Ansari Saudi Arabia(Riyadh)
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:23 ARST