RE: CBWFQ to block Youtube

From: Administrator (Administrator@Subfighter.ca)
Date: Tue Nov 18 2008 - 22:16:43 ARST


I have entered this exactly, and still things hit the default-class for some
reason. Is it because I also have nat on the router ? Does that affect the
configuration someway ?

________________________________

From: omar parihuana [mailto:omar.parihuana@gmail.com]
Sent: Tue 11/18/2008 3:43 PM
To: Administrator
Cc: ccielab@groupstudy.com
Subject: Re: CBWFQ to block Youtube

Try this:

Voice_GW_LAB#sh run class-map
Building configuration...

Current configuration : 81 bytes
!
class-map match-all youtube
  match protocol http host "*youtube.com*"
!
end

Voice_GW_LAB#sh run policy-map
Building configuration...

Current configuration : 59 bytes
!
policy-map BLOCK-youtube
  class youtube
   drop
!
end

Voice_GW_LAB#sh run int f0/1
Building configuration...

Current configuration : 234 bytes
!
interface FastEthernet0/1
...
service-policy output BLOCK-youtube
end

Voice_GW_LAB#

Voice_GW_LAB#sh policy-map interface f0/1
 FastEthernet0/1

  Service-policy output: BLOCK-youtube

    Class-map: youtube (match-all)
      27 packets, 29642 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: protocol http host "*youtube.com*"
      drop

    Class-map: class-default (match-any)
      15842 packets, 1412490 bytes
      5 minute offered rate 0 bps, drop rate 0 bps
      Match: any
Voice_GW_LAB#

On Tue, Nov 18, 2008 at 2:59 PM, Administrator <Administrator@subfighter.ca>
wrote:

        Hi there, I was just doing a lab and thought I would try something on my
test
        DSL connection.

        My intent was to block www.youtube.com with QOS

        Here is what I have ...

        !
         class-map match-all YOUTUBE
         match protocol http url "www.youtube.com"
        !
        !
         policy-map CBWFQ_SHAPE_OUT
         class YOUTUBE
          drop
        !
        !
        interface Ethernet0
         service-policy output CBWFQ_SHAPE_OUT
        !

        But for some reason, it doesnt work. I have CEF enabled. When I do a show
        policy-map int e0, it shows everything hitting the default class-default

        I am sure I am missing something simple, but my QOS skillz are low and am
        trying to build them. Thanks !

        Blogs and organic groups at http://www.ccie.net

        _______________________________________________________________________
        Subscription information may be found at:
        http://www.groupstudy.com/list/CCIELab.html

--
Omar E.P.T
-----------------
Certified Networking Professionals make better Connections!

Blogs and organic groups at http://www.ccie.net



This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST