From: Rookie Ccie (rookie.ccie@gmail.com)
Date: Tue Dec 02 2008 - 02:52:10 ARST
Hi,
Thanks for your replies. Below are the details of the switch
SUP - 720 running IOS 12.2(18)SXF14
Line Card
sh interfaces gigabitEthernet 2/1 capabilities
GigabitEthernet2/1
Dot1x: yes
Model: WS-X6724-SFP
Type: 1000BaseLH
Speed: 1000
Duplex: full
Trunk encap. type: 802.1Q,ISL
Trunk mode: on,off,desirable,nonegotiate
Channel: yes
Broadcast suppression: percentage(0-100)
Flowcontrol: rx-(off,on,desired),tx-(off,on,desired)
Membership: static
Fast Start: yes
QOS scheduling: rx-(1q8t), tx-(1p3q8t)
CoS rewrite: yes
ToS rewrite: yes
Inline power: no
SPAN: source/destination
UDLD yes
Link Debounce: yes
Link Debounce Time: yes
Ports on ASIC: 1-12
Port-Security: yes
This IOS version does not support autoqos, can anybody share with me the
auto generated commands in autoqos or point me towards a link.
Regards
Rookie
On Tue, Dec 2, 2008 at 5:51 AM, Marko Milivojevic <markom@markom.info>wrote:
> On Mon, Dec 1, 2008 at 20:38, Rookie Ccie <rookie.ccie@gmail.com> wrote:
> > Can any body share with me a working QOS config of a 6500 core switch.
> The
> > requirement is to trust the received DSCP and prioritize it in the egress
> > queue.
>
> I know that this won't help you, but I feel obliged to say it.
>
> Welcome to Catalyst QoS hell. Every single platform, every single
> blade has different features, different syntax, different
> understanding of concepts and different defaults. Not to mention that
> some act on DSCP, while other on COS and some are simply brain
> damaged.
>
> As ar as 6500 goes, like others have mentioned, exact features depend
> heavily on what blades you have installed and whether you are running
> CatOS or IOS.
>
> Also, it would help to know a little bit more about what exactly you
> mean when you say "prioritize in the egress queue". Don't you care
> what happens in the ingress queue, in the box itself, etc?
>
> You can configure trust by issuing "mls qos trust dscp" on most of the
> L2 interfaces.
>
> --
> Marko
> CCIE #18427 (SP)
> My network blog: http://cisco.markom.info/
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:07 ARST