From: GAURAV MADAN (gauravmadan1177@gmail.com)
Date: Thu Dec 11 2008 - 12:43:03 ARST
Thnx Rick
It helped . Bad on my part ! messge was so clear that i should have debugged
that .... I am really frustrated with myself on this :(
Gaurav Madan
On Thu, Dec 11, 2008 at 7:33 PM, Rick Mur <rick@rickmur.com> wrote:
>
> Because R4's Frame-relay link is not part of the OSPF network this message
> shouldn't appear. This might be caused by redistribution on R2 (the edge of
> the OSPF network connected to R4).
>
> Read Brian McGahan's blog post about this:
>
>
> http://blog.internetworkexpert.com/2008/08/27/the-war-is-on-between-r4-and-sw4/
>
>
>
> Rick Mur
> CCIE #21946 (R&S)
> CCNP, CCIP, JNCIA-ER, MCSE
> rick@rickmur.com
>
>
>
>
>
> On 11 dec 2008, at 14:25, GAURAV MADAN wrote:
>
> VOL 3 Lab 7
>> task 4.6 onwards
>>
>> On Thu, Dec 11, 2008 at 6:29 PM, Rick Mur <rick@rickmur.com> wrote:
>>
>> Strange behaviour, it should work based on my test topology.
>>>
>>> Could you add the specific IEWB lab and task number with it?
>>>
>>> Because the topology lacks a little now because we can't see what devices
>>> are behind it and how they are connected and routed.
>>>
>>> (btw. I always want to say 'dude' after I see FLOOD_WAR!! ;-)
>>>
>>> Rick Mur
>>>
>>> CCIE #21946 (R&S)
>>>
>>> CCNP, CCIP, JNCIA-ER, MCSE
>>>
>>> rick@rickmur.com
>>>
>>> On Thu, 11 Dec 2008 17:39:58 +0530
>>>
>>> "GAURAV MADAN" <gauravmadan1177@gmail.com> wrote:
>>>
>>> HI frnds
>>>
>>> I am not at all able to point out whats happening wrong . Dont want
>>>
>>> to
>>>
>>> unconfigure and configure again untill I dig whats happening : PLzz
>>>
>>> help em
>>>
>>> in this
>>>
>>> ======s0/0/0=R4
>>>
>>> | s0/0/1
>>>
>>> |
>>>
>>> |
>>>
>>> | s0/0/1
>>>
>>> ======s0/0/0=R5
>>>
>>> R4 and R5 are on PPP link but I had unsed IP unnumbered .
>>>
>>> R4 getting IP from s0/0/0 ; R5 getting from virtual-template
>>>
>>> R4 s0/0/0 is PPPoFR ..... R5 s0/0/0 is normal FR
>>>
>>> **************************** R4 Configs *********************
>>>
>>> Rack1R4(config-if)#do sh run int s0/0/1
>>>
>>> Building configuration...
>>>
>>> Current configuration : 100 bytes
>>>
>>> !
>>>
>>> interface Serial0/0/1
>>>
>>> ip unnumbered Virtual-Template1
>>>
>>> encapsulation ppp
>>>
>>> clock rate 125000
>>>
>>> end
>>>
>>> Rack1R4(config-if)#do sh run int s0/0/0
>>>
>>> Building configuration...
>>>
>>> Current configuration : 125 bytes
>>>
>>> !
>>>
>>> interface Serial0/0/0
>>>
>>> no ip address
>>>
>>> encapsulation frame-relay
>>>
>>> frame-relay interface-dlci 402 ppp Virtual-Template1
>>>
>>> end
>>>
>>> Rack1R4(config-if)#do sh run int virtual-temp 1
>>>
>>> Building configuration...
>>>
>>> Current configuration : 124 bytes
>>>
>>> !
>>>
>>> interface Virtual-Template1
>>>
>>> ip address 144.1.24.4 255.255.255.0
>>>
>>> ppp authentication chap
>>>
>>> ppp chap hostname Rack1R4
>>>
>>> end
>>>
>>> *************************** R5's configs
>>>
>>> ******************************
>>>
>>> Rack1R5(config-if)#do sh run int s0/0/0
>>>
>>> Building configuration...
>>>
>>> Current configuration : 71 bytes
>>>
>>> !
>>>
>>> interface Serial0/0/0
>>>
>>> no ip address
>>>
>>> encapsulation frame-relay
>>>
>>> end
>>>
>>> Rack1R5(config-if)#do sh run int s0/0/0.1
>>>
>>> Building configuration...
>>>
>>> Current configuration : 151 bytes
>>>
>>> !
>>>
>>> interface Serial0/0/0.1 multipoint
>>>
>>> ip address 144.1.15.5 255.255.255.0
>>>
>>> ip ospf network broadcast
>>>
>>> frame-relay map ip 144.1.15.1 501 broadcast
>>>
>>> end
>>>
>>> Rack1R5(config-if)#do sh run int s0/0/1
>>>
>>> Building configuration...
>>>
>>> Current configuration : 77 bytes
>>>
>>> !
>>>
>>> interface Serial0/0/1
>>>
>>> ip unnumbered Serial0/0/0.1
>>>
>>> encapsulation ppp
>>>
>>> end
>>>
>>> *************************** OSPF Configs ***********************
>>>
>>> R5
>>>
>>> !
>>>
>>> router ospf 10
>>>
>>> router-id 150.1.5.5
>>>
>>> log-adjacency-changes
>>>
>>> network 144.1.5.5 0.0.0.0 area 0
>>>
>>> network 144.1.15.5 0.0.0.0 area 0
>>>
>>> !
>>>
>>> Rack1R4(config-if)#do sh run | sec ospf
>>>
>>> router ospf 10
>>>
>>> log-adjacency-changes
>>>
>>> area 4 range 150.1.4.0 255.255.255.0
>>>
>>> network 144.1.24.4 0.0.0.0 area 0
>>>
>>> network 150.1.4.4 0.0.0.0 area 4
>>>
>>> ********************************************** ERROR
>>>
>>> ********************
>>>
>>> Rack1R4(config-if)#
>>>
>>> *Dec 11 12:01:27.866: %OSPF-4-DUP_RTRID_AREA: Detected router with
>>>
>>> duplicate
>>>
>>> router ID 150.1.4.4 in area 0
>>>
>>> Rack1R4(config-if)#
>>>
>>> *Dec 11 12:01:45.090: %OSPF-4-FLOOD_WAR: Process 10 re-originates LSA
>>>
>>> ID
>>>
>>> 144.1.5.10 type-2 adv-rtr 150.1.4.4 in area 0
>>>
>>> Where am i missing . Can someone please guide
>>>
>>> Gaurav Madan.
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>>
>>> Subscription information may be found at:
>>>
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Thu Jan 01 2009 - 12:53:08 ARST