From: CCIE To Be (ccie.tobe81@gmail.com)
Date: Fri Jan 09 2009 - 09:36:47 ARST
Dear Group,
Below is the topology,
SW1-------------------SW2
| |
| |
R1-----SW3------------------SW4--------R2
Trunks are configured among all switches and R1 & R2 are customer's routers.
We need to configure dot1q-tunnel on SW3 and SW4 to transparently pass the
traffic bewteen R1 & R2. My question is that should we need to increase mtu
only on SW3 & SW4 or we should change mtu to 1504 on all switches ??
HTH
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:37 ARST