From: Tony Schaffran \(GS\) (groupstudy@cconlinelabs.com)
Date: Fri Feb 20 2009 - 02:52:53 ARST
Set ip precedence is the old version.
Set precedence is the new version created to include ipv6
Tony Schaffran
Sr. Network Consultant
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of dave
dave
Sent: Thursday, February 19, 2009 8:33 PM
To: Cisco certification
Subject: QoS Difference "set ip precedece" & "set precedence"
Hi Expert,
What is difference the below two in term of the case/solution?
r1(config-pmap-c)#set ?
atm-clp Set ATM CLP bit to 1
cos Set IEEE 802.1Q/ISL class of service/user priority
discard-class Discard behavior identifier
* *dscp Set DSCP in IP(v4) and IPv6 packets
fr-de Set FR DE bit to 1
ip Set IP specific values
mpls Set MPLS specific values
* precedence Set precedence in IP(v4) and IPv6 packets
* qos-group Set QoS Group
r1(config-pmap-c)#set ip ?
dscp Set IP DSCP (DiffServ CodePointint)
*precedence Set IP precedence*
r1(config-pmap-c)#set ip
Regards,
dave
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:44:12 ARST