From: Edouard Zorrilla (ezorrilla@tsf.com.pe)
Date: Thu Mar 05 2009 - 09:51:25 ARST
Would please paste the solucion you have donde ? Other, the traffic source
is sourced from the router itself or by something else inside ?
Regards
----- Original Message -----
From: "Groupstudy @ CrespoNetworks" <groupstudy@cresponet.com>
Cc: "Cisco certification" <ccielab@groupstudy.com>
Sent: Thursday, March 05, 2009 5:35 AM
Subject: Advanced Nat Question
> GS,
>
> I was hoping someone could help me understand, what seems to me, an
> advanced NAT question that I can't seem to get my head around. I
> actually think it may be a typo in the solution. Basically, the
> question is from "CCIE Routing and Switching Practice Labs" Practice Lab
> 3 Section 7. BTW, I know the book is a bit dated but I think it still
> useful. The point of the question is to change the sa and da with the
> use of proxy arp and no ip redirects. Has anyone done this task and if
> so, can you confirm the solution? I configured it exactly as the
> solution states but it does not work. Also, the solution attempts to
> translate inside and outside addresses with only one interface and just
> with a "ip nat outside" statement. Thank you in advance.
>
> Jimmy
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:04 ART