From: nowy1981 (freemaxis@gmail.com)
Date: Sun Mar 29 2009 - 08:07:17 ART
Hi GS
I have following MQC FRTS+LLQ+CBWFQ. I would shape PVC 102 to 15 Mbps +
give priority for EF up to 1 Mbps and guarantee for example 10 Mbps
for SMTP.
I see that I can apply it to the subinterface on three ways and the
output of the show policy-map interface s1/0.102 is the same at each time.
Question: I need to confirm. Will it work in the same way?
class-map match-all SMTP
match protocol smtp
class-map match-all VOICE
match ip dscp ef
!
policy-map LLQ+CBWFQ
class VOICE
priority 1000
class SMTP
bandwidth 10000
policy-map FRTS
class class-default
shape average 15000000 150000
shape adaptive 11000000
shape fecn-adapt
service-policy LLQ+CBWFQ
map-class frame-relay DLCI-102
service-policy output FRTS
R1#show policy-map interface s1/0.102
Serial1/0.102
Service-policy output: FRTS
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Traffic Shaping
Target/Average Byte Sustain Excess Interval Increment
Rate Limit bits/int bits/int (ms) (bytes)
15000000/15000000 37500 150000 150000 10 18750
Adapt Queue Packets Bytes Packets Bytes Shaping
Active Depth Delayed Delayed Active
- 0 0 0 0 0 no
Service-policy : LLQ+CBWFQ
Class-map: VOICE (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: ip dscp ef (46)
Queueing
Strict Priority
Output Queue: Conversation 264
Bandwidth 1000 (kbps) Burst 25000 (Bytes)
(pkts matched/bytes matched) 0/0
(total drops/bytes drops) 0/0
Class-map: SMTP (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol smtp
Queueing
Output Queue: Conversation 265
Bandwidth 10000 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 0/0
(depth/total drops/no-buffer drops) 0/0/0
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Example 1
interface Serial1/0.102 point-to-point
ip address 10.0.0.1 255.255.255.0
frame-relay interface-dlci 102
class DLCI-102
Example 2
interface Serial1/0.102 point-to-point
ip address 10.0.0.1 255.255.255.0
service-policy output FRTS
frame-relay interface-dlci 102
Exaxmple 3
interface Serial1/0.102 point-to-point
ip address 10.0.0.1 255.255.255.0
frame-relay interface-dlci 102
service-policy output FRTS
Thanks
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Apr 06 2009 - 06:44:08 ART