Re: IS-IS issue over ethernet subinterface

R1#ping 10.10.10.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms

R1#sh isis neighbors

System Id Type Interface IP Address State Holdtime Circuit Id
R1#

On Wed, Apr 8, 2009 at 2:29 PM, Ernest Wambari <ewambari_at_gmail.com> wrote:

> Hello Dheven,
>
> Please provide the following:
>
> 1.sh clns nei
> 2.debug isis adj-packet
>
> Regards,
>
> W.
>
> On Wed, Apr 8, 2009 at 2:57 PM, Dheven <dheven_at_gmail.com> wrote:
>
>> Hi GS,
>> I am having a issue setting up IS-IS over ethernet subinterfaces.
>>
>> here is my setup:
>>
>> R1 (trunk) ---(trunk) SW1 (trunk) ----(trunk) SW2 (trunk) ----- (trunk) R2
>>
>>
>> R1 Configs:
>>
>> int fa0/0.12
>> encapsulation dot1q 12
>> ip address 10.10.10.1 255.255.255.0
>> ip router isis
>>
>> router isis
>> net 47.0001.0000.0000.0001.00
>>
>>
>> SW1 configs:
>>
>> fa0/1
>> switchport trunk encap dot1q
>> switch port trunk allowed vlan 12
>> switch mode trunk
>>
>> vlan 12 is carried across the trunk link between SW1 and SW2
>>
>> R2 configs:
>>
>> Int fa0/0.12
>> encapsulation dot1q 12
>> ip address 10.10.10.2 255.255.255.0
>> ip router isis
>>
>> router isis
>> net 49.0001.0000.0000.0002.00
>>
>> SW2 configs:
>> int fa0/2
>> switchport trunk encap dot1q
>> switch port trunk allowed vlan 12
>> switch mode trunk
>>
>>
>> Please help.
>>
>> Regards
>>
>> Dheven
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>

-- 
Always forgive your enemies - Nothing annoys them so much.
Blogs and organic groups at http://www.ccie.net