RE: bridging

From: David Prall <dcp_at_dcptech.com>
Date: Fri, 10 Apr 2009 08:28:04 -0400

Marc,
There are definitely SRT's, just being able to do what you expect and have
it TAC supported make them such. My favorite is always the external loopback
cable to make a single router perform things that should be seperated into
two devices.

David

--
http://dcp.dcptech.com
 
> -----Original Message-----
> From: Marc La Porte [mailto:marc.a.laporte_at_gmail.com]
> Sent: Friday, April 10, 2009 12:39 AM
> To: Ryan West
> Cc: David Prall; hvlugo_at_telmex.com; ccielab_at_groupstudy.com
> Subject: Re: bridging
> 
> there is no such thing as a SRT. You either understand it or you don't
> ;-)
> 
> 
> On Fri, Apr 10, 2009 at 06:32, Ryan West <rwest_at_zyedge.com> wrote:
> 
> 
> 	David,
> 
> 	It does work with routing disabled and IRB turned off.  However,
> it does fall under the SRT (stupid router trick) section of the lab
> exam blueprint.
> 
> 	-ryan
> 
> 
> 	-----Original Message-----
> 	From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
> Behalf Of David Prall
> 	Sent: Thursday, April 09, 2009 11:19 PM
> 	To: hvlugo_at_telmex.com; ccielab_at_groupstudy.com
> 	Subject: RE: bridging
> 
> 	Well you can't have the same IP address on two interfaces.
> 
> 	--
> 	http://dcp.dcptech.com
> 
> 
> 	> -----Original Message-----
> 	> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
> Behalf Of
> 	> hvlugo_at_telmex.com
> 	> Sent: Thursday, April 09, 2009 10:54 PM
> 	> To: ccielab_at_groupstudy.com
> 	> Subject: bridging
> 	>
> 	> Hi,
> 	>
> 	>
> 	> I'm configuring the lab 4 from IE woorkbook III , in the point
> 4.2.
> 	>
> 	> I can`t reach BB1 from R4
> 	>
> 	> At R6
> 	>
> 	> no ip routing
> 	> bridge 5 protocol ieee
> 	>
> 	> Int fastethernet 0/0
> 	> ip address 54.1.10.6 255.255.255.0
> 	> bridge-group 5
> 	>
> 	> int ser0/0/0
> 	> no ip address
> 	> encapsulation frame-relay IETF
> 	> frame-relay lmi-type cisco
> 	>
> 	> int ser0/0/0.1
> 	> ip address 54.1.10.6 255.255.255.0
> 	> frame-relay interface-dlci 401
> 	> bridge-group 5
> 	>
> 	> is missing something?
> 	>
> 	> Thank's
> 	> Vlad
> 	>
> 	>
> 	> Blogs and organic groups at http://www.ccie.net
> 	>
> 	>
> _______________________________________________________________________
> 	> Subscription information may be found at:
> 	> http://www.groupstudy.com/list/CCIELab.html
> 
> 
> 	Blogs and organic groups at http://www.ccie.net
> 
> 	_________________________________________________________________
> ______
> 	Subscription information may be found at:
> 	http://www.groupstudy.com/list/CCIELab.html
> 
> 
> 	Blogs and organic groups at http://www.ccie.net
> 
> 	_________________________________________________________________
> ______
> 	Subscription information may be found at:
> 	http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Fri Apr 10 2009 - 08:28:04 ART

This archive was generated by hypermail 2.2.0 : Mon May 04 2009 - 07:39:11 ART