MPLS traffic engineering problem

Folks ,
 
I have a traffic engineering tunnel between two routers , R1 and R4 ( this is
scenario from IE lab 5)
 
the mpls forwarding on R1 sees the loopback of R4 via the tunnel with POP tag
[T] , while on R4 i see R1 loopback as Untagged ...> i suppose this is wrong
...but how can i fix such error ??
 
the tunnel is up from both sides , and i can ping from loopback to loopback
....any ideas ??
 
 
 
 
 
R1
 
Label Label or VC or Tunnel Id Switched interface
1000 Pop Label 124.1.2.2/32 0 AT4/0 124.1.12.2
1001 Pop Label 124.1.24.0/24 0 AT4/0 124.1.12.2
1002 Pop Label 124.1.13.3/32 0 Se2/1 point2point
1003 Pop Label 124.1.23.0/24 0 AT4/0 124.1.12.2
1004 Pop Label 124.1.3.3/32 0 Se2/1 point2point
1005 Pop Label [T] 124.1.4.4/32 0 Tu14 point2point
1006 Pop Label 124.1.34.0/24 0 Se2/1 point2point
1007 Aggregate 64.1.16.0/24[V] 0 AS100
1009 No Label 64.1.6.6/32[V] 613 Fa1/0 64.1.16.6
 
 
R4
Rack1R4#show mpls forwarding-table
Local Outgoing Prefix Bytes tag Outgoing Next Hop
tag tag or VC or Tunnel Id switched interface
4000 Untagged[T] 124.1.1.1/32 0 Tu41 point2point
4001 Pop tag 124.1.2.2/32 0 Se1/0 124.1.24.2
4002 Pop tag 124.1.3.3/32 0 Et0/0 124.1.34.3
4003 Pop tag 124.1.12.0/24 0 Se1/0 124.1.24.2
4004 Pop tag 124.1.13.0/24 0 Et0/0 124.1.34.3
4005 Pop tag 124.1.23.0/24 0 Et0/0 124.1.34.3
4006 Aggregate 64.1.45.0/24[V] 0
4008 Untagged 64.1.57.0/24[V] 0 Et0/1 64.1.45.5
4009 Untagged 64.1.5.5/32[V] 6551 Et0/1 64.1.45.5
4010 Untagged 64.1.8.8/32[V] 0 Et0/1 64.1.45.5
4011 Untagged 64.1.78.0/24[V] 0 Et0/1 64.1.45.5
4012 Untagged 64.1.7.7/32[V] 0 Et0/1 64.1.45.5
[T] Forwarding through a TSP tunnel.
        View additional tagging info with the 'detail' option
 

Blogs and organic groups at http://www.ccie.net
Received on Sun Apr 12 2009 - 08:48:58 ART