Re: Voice issue

Sameer,
????????????? Do a? sh dsp dsp all?? and send the output and do a sh diag and send that as well.
????????????????????????????????????????????????????????????????????? Karl.

-----Original Message-----
From: armylegionmedic_at_aol.com
To: i_sameer_at_hotmail.com; ccielab_at_groupstudy.com; costephe_at_cisco.com
Sent: Sun, 26 Apr 2009 10:01 am
Subject: Re: Voice issue

 Have you already configured you Media Resources on the Gateway? If you have, I
would also lower the number of assigned resourcesto your conferencing and MTP/
Transcoding.

Can you send a show run?

 
Regards,

James

-----Original Message-----
From: sameer inam <i_sameer_at_hotmail.com>
To: ccielab_at_groupstudy.com; costephe_at_cisco.com
Sent: Sun, 26 Apr 2009 12:51 am
Subject: Voice issue

Hello Guys,

I need some help , I trying to install the New Voice gateway due to some
reason its gave me errors, please see below , when I configured the controller
E1 1/0 it gave me the below error ..

#controlLer E1 1/0
controller)#pr
controller)#pri-group ?

pri-group timeslots 1-31

% Not enough DSP resources available to configure pri-group on controller E1
1/0
% The remaining dsp resources are enough for 0 time slots.
% For current codec complexity, 2 extra dsp(s) are required to create this
voice
 port.

NM-HDV2-2T1/E1 (Network E1 CONTROLLER )

Thanks,

Sameer
Received on Sun Apr 26 2009 - 12:02:27 ART