Hi Kevin,
can you post port and global spanning-tree configs on both sides?
In my opinion this would be issue that needs to be fixed b4 moving on.
--------------------------------------------------
From: "kevin dalby" <ccieconsult_at_gmail.com>
Sent: Tuesday, April 28, 2009 5:37 AM
To: <ccielab_at_groupstudy.com>
Subject: Spanning Tree: %SW_MATM-4-MACFLAP_NOTIF
> Hello All,
>
> I'm seeing the MACFLAP_NOTIF errors when I change my native vlan to 46 
> after
> I trunk two ports together.  If I put these back to vlan 1 the errors 
> stop.
> I believe I have a spanning tree loop as both switch 1 & 2 are the roots
> and ports 13 &15 on both switches are forwarding.
>
> sw1 f0/13----sw2 f0/13
> sw1 f0/15----sw2 f0/15
>
> I have two questions:
>
> a) Why does this happen when I change the native vlan, what is it that
> confuses spanning tree?
> b) If I see this error on the CCIE lab and I have full connectivity should 
> I
> try and troubleshoot or just move on to finish the lab?  Will I lose 
> points
> for this error if I have full connectivity?
>
> Thanks in advance
>
> ----Details Below
>
> 12:02:55: %SW_MATM-4-MACFLAP_NOTIF: Host 0010.2930.b701 in vlan 1 is
> flapping between port Fa0/13 and port Fa0/15
> 12:02:55: %SW_MATM-4-MACFLAP_NOTIF: Host 0007.eba9.df81 in vlan 1 is
> flapping between port Fa0/13 and port Fa0/15
> 12:02:55: %SW_MATM-4-MACFLAP_NOTIF: Host 0050.0f05.6a21 in vlan 1 is
> flapping between port Fa0/13 and port Fa0/15
> 12:02:55: %SW_MATM-4-MACFLAP_NOTIF: Host 000f.f780.eed0 in vlan 1 is
> flapping between port Fa0/15 and port Fa0/13
>
> Rack1SW1(config)#do sh int trunk
> Port        Mode             Encapsulation  Status        Native vlan
> Fa0/13      on               802.1q         trunking      46
> Fa0/15      on               802.1q         trunking      46
>
> -------------------------
>
> Rack1SW2(config-if-range)# do sh span det
> VLAN0001 is executing the ieee compatible Spanning Tree protocol
>  Bridge Identifier has priority 32768, sysid 1, address 0014.6aa3.f880
>  Configured hello time 2, max age 20, forward delay 15
>  We are the root of the spanning tree
>  Topology change flag not set, detected flag not set
>  Number of topology changes 17 last change occurred 00:47:00 ago
>          from FastEthernet0/2
>  Times:  hold 1, topology change 35, notification 2
>          hello 2, max age 20, forward delay 15
>  Timers: hello 0, topology change 0, notification 0, aging 300
> Port 13 (FastEthernet0/13) of VLAN0001 is designated forwarding
>   Port path cost 19, Port priority 128, Port Identifier 128.13.
>   Designated root has priority 32769, address 0014.6aa3.f880
>   Designated bridge has priority 32769, address 0014.6aa3.f880
>   Designated port id is 128.13, designated path cost 0
>   Timers: message age 0, forward delay 0, hold 0
>   Number of transitions to forwarding state: 1
>   Link type is point-to-point by default
>   BPDU: sent 8162, received 71
> Port 15 (FastEthernet0/15) of VLAN0001 is designated forwarding
>   Port path cost 19, Port priority 128, Port Identifier 128.15.
>   Designated root has priority 32769, address 0014.6aa3.f880
>   Designated bridge has priority 32769, address 0014.6aa3.f880
>   Designated port id is 128.15, designated path cost 0
>   Timers: message age 0, forward delay 0, hold 0
>   Number of transitions to forwarding state: 1
>   Link type is point-to-point by default
>   BPDU: sent 8166, received 69
>
> --------------------------------------------------------
>
> Rack1SW1(config)#do sh span det
> VLAN0001 is executing the ieee compatible Spanning Tree protocol
>  Bridge Identifier has priority 32768, sysid 1, address 0014.f20d.7780
>  Configured hello time 2, max age 20, forward delay 15
>  We are the root of the spanning tree
>  Topology change flag not set, detected flag not set
>  Number of topology changes 24 last change occurred 00:47:10 ago
>          from FastEthernet0/3
>  Times:  hold 1, topology change 35, notification 2
>          hello 2, max age 20, forward delay 15
>  Timers: hello 1, topology change 0, notification 0, aging 300
> Port 13 (FastEthernet0/13) of VLAN0001 is designated forwarding
>   Port path cost 19, Port priority 128, Port Identifier 128.13.
>   Designated root has priority 32769, address 0014.f20d.7780
>   Designated bridge has priority 32769, address 0014.f20d.7780
>   Designated port id is 128.13, designated path cost 0
>   Timers: message age 0, forward delay 0, hold 0
>   Number of transitions to forwarding state: 1
>   Link type is point-to-point by default
>   BPDU: sent 7993, received 90
> Port 15 (FastEthernet0/15) of VLAN0001 is designated forwarding
>   Port path cost 19, Port priority 128, Port Identifier 128.15.
>   Designated root has priority 32769, address 0014.f20d.7780
>   Designated bridge has priority 32769, address 0014.f20d.7780
>   Designated port id is 128.15, designated path cost 0
>   Timers: message age 0, forward delay 0, hold 0
>   Number of transitions to forwarding state: 2
>   Link type is point-to-point by default
>   BPDU: sent 7992, received 89
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Tue Apr 28 2009 - 06:13:39 ART
This archive was generated by hypermail 2.2.0 : Mon May 04 2009 - 07:39:13 ART