Re: Virtual-template interface and multilink PPP

yeah i got the point.! ty Scott.
Thanking You

Yours Sincerely

Divin Mathew John
divinjohn_at_gmail.com
divin_at_dide3d.com
http://www.dide3d.com
+91 9945430983
+91 9846697191
+974 5008916
PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
Sent from Bangalore, KA, India

On Thu, Apr 30, 2009 at 4:52 PM, Scott Morris
<smorris_at_internetworkexpert.com> wrote:
> In the config you list below though, you're using it to combine two DLCI's.
> And without any resultant map-class configuration, since you enabled
> traffic-shaping, you are defaulting your shaper to 56k per physical link.
> (per DLCI, but you only have one)
>
>
>
> Scott Morris, CCIEx4 (R&S/ISP-Dial/Security/Service Provider) #4713,
>
> JNCIE-M #153, JNCIS-ER, CISSP, et al.
>
> JNCI-M, JNCI-ER
>
> smorris_at_internetworkexpert.com
>
> Internetwork Expert, Inc.
>
> http://www.InternetworkExpert.com
>
> Toll Free: 877-224-8987
>
> Outside US: 775-826-4344
>
> Knowledge is power.
>
> Power corrupts.
>
> Study hard and be Eeeeviiiil......
>
> Divin Mathew John wrote:
>
> Isn't PPP Multilink used to say combine 1Mb+1Mb = 2Mb link?
>
> like this
> interface Serial0/0
> description Physical Interface 1
> bandwidth 2000
> no ip address
> encapsulation frame-relay
> frame-relay fragmentation voice-adaptive deactivation 15
> frame-relay traffic-shaping
> frame-relay interface-dlci 16 ppp Virtual-Template1
> frame-relay lmi-type ansi
>
> interface Serial0/1
> description Physical Interface 2
> bandwidth 2000
> no ip address
> encapsulation frame-relay
> frame-relay fragmentation voice-adaptive deactivation 15
> frame-relay traffic-shaping
> frame-relay interface-dlci 16 ppp Virtual-Template1
> frame-relay lmi-type ansi
>
> interface Virtual-Template1
> no ip address
> ppp multilink
> ppp multilink group 1
>
> interface Multilink1
> description Bundled Interface
> bandwidth 4000
> ip address 10.87.1.1 255.255.255.248
> ppp multilink
> ppp multilink group 1
>
> Thanking You
>
> Yours Sincerely
>
> Divin Mathew John
> divinjohn_at_gmail.com
> divin_at_dide3d.com
> http://www.dide3d.com
> +91 9945430983
> +91 9846697191
> +974 5008916
> PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt
> Sent from Bangalore, KA, India
>
>
> On Tue, Apr 28, 2009 at 9:34 AM, Scott Morris
> <smorris_at_internetworkexpert.com> wrote:
>
>
> Either way will work.
>
>
>
>
> *Scott Morris*, CCIE/x4/ (R&S/ISP-Dial/Security/Service Provider) #4713,
>
> JNCIE-M #153, JNCIS-ER, CISSP, et al.
>
> JNCI-M, JNCI-ER
>
> smorris_at_internetworkexpert.com
>
>
> Internetwork Expert, Inc.
>
> http://www.InternetworkExpert.com
>
> Toll Free: 877-224-8987
>
> Outside US: 775-826-4344
>
>
> Knowledge is power.
>
> Power corrupts.
>
> Study hard and be Eeeeviiiil......
>
>
>
>
>
> Modular wrote:
>
>
> Lets say I have a physical link between 2 routers running Frame-Relay. I
> have three DLCIs on each side that
>
> point to the other end. I want to combine the three DLCIs on each side under
> one interface & subnet so I decide
>
> to use a virtual-template with multilink PPP.
>
> Question: Am I required to configure a multilink interface and configure the
> virtual-template interface as a member
>
> of it s multilink group or can I just configure multilink-ppp under
> the virtual-template
> interface??
>
>
>
> So if I have this:
>
> R1:
>
> serial 0/0
>
> encapsulation frame-relay
>
> frame-relay interface-dlci 102 ppp virtual-template 1
>
> frame-relay interface-dlci 112 ppp virtual-template 1
>
> frame-relay interface-dlci 122 ppp virtual-template 1
>
>
>
> R2:
>
> serial 0/0
>
> encapsulation frame-relay
>
> frame-relay interface-dlci 201 ppp virtual-template 1
>
> frame-relay interface-dlci 211 ppp virtual-template 1
>
> frame-relay interface-dlci 221 ppp virtual-template 1
>
>
>
>
>
> On R1 do I need this:
>
>
>
> multilink 1
>
> ip address 1.1.1.1 255.255.255.0
>
> encapsulation ppp
>
> ppp multilink-group 1
>
>
>
> virtual-template 1
>
> ppp multilink
>
> ppp multilink-group 1
>
>
>
>
>
> Or can I just go with this:
>
>
>
> virtual-template 1
>
> ip address 1.1.1.1 255.255.255.0
>
> ppp multilink
>
>
>
>
>
> Thanks,
>
> Bryan R.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Apr 30 2009 - 18:18:55 ART