Re: Problem Match COS In 3750

I Think I Have found the answer.

class-map COS0
match access-group name COS0

But I WIll have to check it out...

On 5/7/09, WW)W WWWW W <eshedalonie_at_gmail.com> wrote:
>
> I See that in the 3750 I Can't match COS in Class-Map
>
> Switch(config)#class-map COS0
> Switch(config-cmap)#match ?
> access-group Access group
> any Any packets
> input-interface Select one or more input interfaces to match
> ip IP specific values
> not Negate this match result
> packet Layer 3 Packet length
> protocol Protocol
>
> But I See I can configure Mac Access-list with Match to COS
>
> mac access-list extended COS0
> permit any any cos 0
> mac access-list extended COS1
> permit any any cos 1
> mac access-list extended COS2
> permit any any cos 2
> mac access-list extended COS3
> permit any any cos 3
> mac access-list extended COS4
> permit any any cos 4
> mac access-list extended COS5
> permit any any cos 5
> mac access-list extended COS6
> permit any any cos 6
> mac access-list extended COS7
> permit any any cos 7
> mac access-list extended IPV6a
> permit any any 0x8644 0x0
>
>
> How Can I Attach the mac access-lists to the service-policy ?
>
> witch(config)#class-map COS0
> Switch(config-cmap)#?
> QoS class-map configuration commands:
> description Class-Map description
> exit Exit from QoS class-map configuration mode
> match classification criteria
> no Negate or set default values of a command
>
> Switch(config-cmap)#match ?
> access-group Access group
> any Any packets
> input-interface Select one or more input interfaces to match
> ip IP specific values
> not Negate this match result
> packet Layer 3 Packet length
> protocol Protocol
>
>
> Switch(config-cmap)#match an
> Switch(config-cmap)#match any ?
> <cr>
>
> Switch(config-cmap)#match pac
> Switch(config-cmap)#match packet ?
> length Layer 3 Packet length
>
> Switch(config-cmap)#match packet le
> Switch(config-cmap)#match packet length ?
> max Maximum length of packet
> min Minimum length of packet
>
> Switch(config-cmap)#match ip ?
> dscp Match IP DSCP (DiffServ CodePoints)
> precedence Match IP precedence
>
>
>
> Switch(config)#policy-map QOS
>
> Switch(config-pmap)#class COS0

Blogs and organic groups at http://www.ccie.net
Received on Thu May 07 2009 - 09:32:02 ART