Re: HSRP Ver 1 and Ver 2

Spot on Chuck .

Since ver 1 is by default .. it is not shown up in "sh standby" as well
But when you are using ver 2 .. it is shown in "show run interface <> " as
well as in "sh standby"

One more thing (plzz ignore if you are aware of this ) .....
The group number in ver 1 is till 255 ; while in ver 2 is till 4095

UUT2(config-if)#standby ?
  <0-255> group number

UUT2(config-if)#standby ver 2
UUT2(config-if)#st
UUT2(config-if)#standby ?
  <0-4095> group number

 HTH
Gaurav Madan
CCIE
On Sun, May 31, 2009 at 12:50 AM, Rsharma <cciers09_at_gmail.com> wrote:

> Hello All,
>
>
> Just curious to know about ...how can we verify about current HSRP version
> running on routers.
>
> R1#*show standby*
> Ethernet1 - Group 1
> Local state is *Active, priority 105*, may preempt
> Hellotime 3 sec, holdtime 10 sec
> Next hello sent in 0.338
> * *Virtual IP address is 192.168.21.10 configured
> Active router is local
> Standby router is 192.168.21.2 expires in 8.280
> *Virtual mac address is 0000.0c07.ac01
> >>>>>>>>>>>>> Apart from this output .Is there any other idea to
> confirm abt HSRP Version ????*
> 13 state changes, last state change 00:46:10
> IP redundancy name is "hsrp-Et0-1"(default)
> Priority tracking 1 interface, 1 up:
> Interface Decrement State
> Serial0 10 Up
>
>
> * Rsharma*
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun May 31 2009 - 17:17:15 ART