RE: Configuring a RP primary and a RP backup with AUTO-RP

The dr-priority command has nothing to do whatsoever with what router
becomes the RP in the multicast domain. The dr-priority command just
influences what router becomes the DR on a particular segment.

Regards,

Joe Astorino
CCIE #24347 (R&S)
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
 

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Rodrigo
Sent: Tuesday, June 09, 2009 5:15 PM
To: 'Ryan West'; ccielab_at_groupstudy.com
Subject: RE: Configuring a RP primary and a RP backup with AUTO-RP

Thanks Ryan,
Can I use the command below too?

ip pim dr-priority 255

-----Mensagem original-----
De: Ryan West [mailto:rwest_at_zyedge.com]
Enviada: terga-feira, 9 de junho de 2009 18:13
Para: Rodrigo; ccielab_at_groupstudy.com
Assunto: RE: Configuring a RP primary and a RP backup with AUTO-RP

Use a higher IP address.

-ryan

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Rodrigo
Sent: Tuesday, June 09, 2009 5:07 PM
To: ccielab_at_groupstudy.com
Subject: Configuring a RP primary and a RP backup with AUTO-RP

Guys,

MULTICAST AUTO-RP:

How do I define a router R1 to be RP primary and a router R2 to be RP backup
(if R1 fails)?

Thanks

Rodrigo

Blogs and organic groups at http://www.ccie.net
Received on Tue Jun 09 2009 - 17:22:35 ART