MD5 digest checksum mismatch error

All,

I have configured the VTP Domain, VTP password on all the required swichtes.
Everything is up and running, etherchannels etc are up. No problem, but,
somehow when I do "sh vtp status" it is showing me this error .. but as I said
password are correctly set on all the switches. What else I am missing here.

Rack1SW1#show vtp status
VTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 1
Maximum VLANs supported locally : 1005
Number of existing VLANs : 13
VTP Operating Mode : Server
VTP Domain Name : CCIE
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xA4 0x40 0x23 0x35 0xB3 0xB7 0x3F 0xA4
*** MD5 digest checksum mismatch on trunk: Fa0/16 ***
*** MD5 digest checksum mismatch on trunk: Fa0/19 ***
Configuration last modified by 150.1.7.7 at 3-1-93 12:02:28
Local updater ID is 163.1.7.7 on interface Vl7 (lowest numbered VLAN interface
found)

************************************************************************

!
interface FastEthernet0/16
 switchport trunk encapsulation dot1q
 switchport mode dynamic desirable
!
interface FastEthernet0/19
 switchport trunk encapsulation dot1q
 switchport mode dynamic desirable
!

Rack1SW1#show interface trunk

Port Mode Encapsulation Status Native vlan
Fa0/16 desirable 802.1q trunking 1
Fa0/19 desirable 802.1q trunking 1

Port Vlans allowed on trunk
Fa0/16 1-4094
Fa0/19 1-4094

Port Vlans allowed and active in management domain
Fa0/16 1,3-7,42,57,263
Fa0/19 1,3-7,42,57,263

Port Vlans in spanning tree forwarding state and not pruned
Fa0/16 1,3-7,42,57,263
Fa0/19 1,3-7,42,57,263
Received on Tue Jul 21 2009 - 10:04:07 ART