Re: PORT-SECURITY with HSRP

Not sure if this will help...................

Sometime back Gaurav Madan has suggested following solution....

There are 2 solutions when u are working with HSRP and Port-Security.
Here probably 1st sol is not of interest as u are configuring port-security
with 1 secure addreess

Sol 1
*******
int f1/0/4
switchport port-security
*switchport port-security maximum 3*

if you have given " switchport port-security mac-address sticky" CLI .. you
will see

*switchport port-security mac-address sticky 0001.0002.0003* <== router mac
*switchport port-security mac-address sticky 0000.0c07.ac01* <== HSRP MAC.

Solution 2
*****************
 R4
int f0/0
ip address <> <>
mac-address 0001.0002.0003
*standby use-bia*

SW
int f1/0/4
switchport port-security
switchport-security mac-address 0001.0002.0003.

HTH
Gaurav Madan
CCIE
==========================================

Kaushal

Blogs and organic groups at http://www.ccie.net
Received on Fri Jul 24 2009 - 11:29:57 ART