Re: One Misconception about lab

Do not reload any of the routers/switches/etc. unless it is absolutely
necessary!!!. If you have to reload, make sure you make a backup of your
config and make sure you know how to skip the startup-config from rommon in
case the router starts to crash during bootup, which happens usually due to
a corrupted startup. In which case, the backup that you made would come in
handy ;)

Regards,
Ramiro G.

On Tue, Jul 28, 2009 at 7:44 AM, Tony Blanco <blancoj17_at_yahoo.com> wrote:

> Believe it or not....you always want to reload the routers in order to make
> sure that all your routes are taking the proper path, reloading the routers
> clears many issues with frame-relay preconfiguration....particular for OSPF
> routing related issues.....that is why reloading the router at the beginning
> and then at end is a healthy task to perform....
>
>
>
> ----- Original Message ----
> From: Salah ElShekeil <salah.elshekeil_at_gmail.com>
> To: Narbik Kocharians <narbikk_at_gmail.com>
> Cc: Charles.Henson_at_regions.com; Anthony Faria <tfaria72_at_gmail.com>; Bryan
> Bartik <bbartik_at_ipexpert.com>; Cisco certification <ccielab_at_groupstudy.com>;
> Darby Weaver <ccie.weaver_at_gmail.com>; Dennis Worth <
> dennis.worth_at_gmail.com>; nobody_at_groupstudy.com; Persio Pucci <
> persio_at_gmail.com>
> Sent: Monday, July 27, 2009 4:59:22 PM
> Subject: Re: One Misconception about lab
>
> I reloaded only one router, at the beginning, I guess no need to reload the
> rack if u r sure that ur configuration is correct :)
>
>
>
> Just me 2 cents :D
>
>
>
> Good luck,
>
>
>
> SE
>
> On Thu, Jul 23, 2009 at 6:06 PM, Narbik Kocharians <narbikk_at_gmail.com
> >wrote:
>
> > One issue about removing the encapsulation and re-entering it back is
> that
> > if the interface was configured with bunch of frame-relay map statements,
> > and you removed the encapsulation, it will also removes the frame-relay
> map
> > statements so if you are planning to do that, make sure you write down
> the
> > frame-relay map statements so you can reconfigure them back.
> >
> > Just a tip
> >
> > On Thu, Jul 23, 2009 at 7:43 AM, <Charles.Henson_at_regions.com> wrote:
> >
> > > Thanks everyone. This is what GS is for.
> > >
> > > Charles
> > >
> > >
> > >
> > >
> > >
> > >
> > > From: Anthony Faria <tfaria72_at_gmail.com>
> > >
> > > To: Charles.Henson_at_regions.com
> > >
> > > Cc: Dennis Worth <dennis.worth_at_gmail.com>, Bryan Bartik <
> > > bbartik_at_ipexpert.com>, Cisco certification
> > > <ccielab_at_groupstudy.com>, Darby Weaver <
> > ccie.weaver_at_gmail.com>,
> > > Narbik Kocharians <narbikk_at_gmail.com>,
> > > nobody_at_groupstudy.com, Persio Pucci <persio_at_gmail.com>
> > >
> > > Date: 07/23/2009 09:41
> > >
> > > Subject: Re: One Misconception about lab
> > >
> > >
> > >
> > >
> > >
> > >
> > > It does nothing for you.
> > >
> > > Tony
> > >
> > > On Thu, Jul 23, 2009 at 7:28 AM, <Charles.Henson_at_regions.com> wrote:
> > > Good morning Dennis.
> > >
> > > Thanks for the clarification. I guess I was a little confused on this.
> > >
> > > Charles From: Dennis Worth <dennis.worth_at_gmail.com>
> To:
> > > Charles.Henson_at_regions.com
> > >
> > > Cc: Anthony Faria <tfaria72_at_gmail.com>, Bryan Bartik <
> > > bbartik_at_ipexpert.com>, Cisco certification <
> > > ccielab_at_groupstudy.com>, Darby Weaver <ccie.weaver_at_gmail.com>, Narbik
> > > Kocharians <narbikk_at_gmail.com>, nobody_at_groupstudy.com,
> > > Persio
> > > Pucci <persio_at_gmail.com> Date: 07/23/2009 09:24
> > >
> > > Subject: Re: One Misconception about lab
> > >
> > >
> > >
> > >
> > >
> > >
> > > From what I am aware of, no arp frame-relay should be removed from the
> > > ios,
> > > as frame-relay has no concept of arp at all. Please correct me if I am
> > > wrong.
> > >
> > > Also make sure if you decide to change encapsulations on an interface
> to
> > > copy the current config on that interface or you will be retyping
> > > everything.
> > >
> > >
> > >
> > > On Thu, Jul 23, 2009 at 7:01 AM, <Charles.Henson_at_regions.com>
> > > wrote: Guys, I'm a little confused on this. For every single lab
> > out
> > > there regardless of the provider, you learn to use "no frame inv" to
> > > prevent the interface or DLCI from answering any requests that it
> > > receives. I understand how this works and I understand why this
> command
> > > alone can meet any requirements for "not using any dynamic
> mappings".
> > > The
> > > documentation on CCO is vague and Internet opinions are varied on
> "no
> > > arp
> > > frame-". I was under the impression that this command prevented the
> > > router from initiating requests. I always use both as a sanity check
> > > even
> > > though I'm completely aware the second is not technically necessary.
> > It's
> > > just cleaner to me. Am I totally mistaken? Is "no arp frame-" a
> legacy
> > > or
> > > depreciated command? Or do I understand it correctly? Please don't
> > tell
> > > me I'm missing a fundamental here.... Charles From:
> > > Anthony
> > > Faria <tfaria72_at_gmail.com> To: Narbik Kocharians <
> > > narbikk_at_gmail.com> Cc: Darby Weaver <
> ccie.weaver_at_gmail.com
> > >,
> > > Bryan Bartik <bbartik_at_ipexpert.com>, Charles.Henson_at_regions.com,
> > > Persio Pucci <persio_at_gmail.com>, Cisco certification <
> > > ccielab_at_groupstudy.com> Date: 07/23/2009 08:39 Subject:
> > Re:
> > > One Misconception about lab LOL that will fix it. does nothing
> > arp
> > > frame On Wed, Jul 22, 2009 at 8:58 PM, Narbik Kocharians <
> > > narbikk_at_gmail.com>wrote: > One thing you are missing is the "no arp
> > > frame" that you have in your > configuration. > > On Wed, Jul 22,
> > 2009
> > > at
> > > 8:51 PM, Darby Weaver <ccie.weaver_at_gmail.com> > wrote: > > > Kewl
> -
> > > Like
> > > I said as long as you are comfortable and you know why you > are >
> >
> > > doing it. Sounds like you did and you got the digits to prove it. >
> >
> > >
> > > > > > > > > > On Wed, Jul 22, 2009 at 11:26 PM, Bryan Bartik <
> > > bbartik_at_ipexpert.com> > > wrote: > > > > > For a reason that shall
> > > remain
> > > undisclosed, I needed to reboot one of > my > > > routers with
> about
> > 20
> > > minutes left. Was I nervous? Of course not... ;-)
> > > > > > > > > Blogs and organic groups at http://www.ccie.net
> > > > > >
> > > >
> > _______________________________________________________________________
> > > >
> > > > Subscription information may be found at: > >
> > > http://www.groupstudy.com/list/CCIELab.html
> > > > > > > > > > > > > > > > > > > > > > -- > Narbik
> Kocharians
> > > >
> > > CCSI#30832, CCIE# 12410 (R&S, SP, Security) >
> > www.MicronicsTraining.com <http://www.micronicstraining.com/> <
> http://www.micronicstraining.com/><
> > http://www.micronicstraining.com/>
> > > > Sr. Technical Instructor > > > Blogs and organic groups at
> > > http://www.ccie.net
> > > > >
> > >
> _______________________________________________________________________
> > >
> > > Subscription information may be found at: >
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
> > >
> _______________________________________________________________________
> > > Subscription
> > > information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
> > >
> _______________________________________________________________________
> > > Subscription
> > > information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > --
> > > Dennis Worth
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
> > --
> > Narbik Kocharians
> > CCSI#30832, CCIE# 12410 (R&S, SP, Security)
> > www.MicronicsTraining.com <http://www.micronicstraining.com/> <
> http://www.micronicstraining.com/>
> > Sr. Technical Instructor
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Salah
> CCIE #24207
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 28 2009 - 08:37:26 ART