Re: OT: New lab v4 assesor at Cisco site and Lab beta exam at

On average how long do the 3725s on Dynamips take to reload when wiping
configs or does it depend on the underlying computer hardware? Xms seem to
take way too long, I guess i'm spoiled using ISRs for the majority of my
routers.

On Wed, Aug 12, 2009 at 1:24 PM, Narbik <narbikk_at_gmail.com> wrote:

> 2651xm with 48m flash is the best choice u can load 12.3(26) and 12.4 and
> have the capability of doing MPLA and most of the other new stuff in v4.
>
>
>
> Sent from my iPhone
>
>
> On Aug 12, 2009, at 11:15 AM, Nadeem Rafi <nrafia_at_gmail.com> wrote:
>
> there is need for 6 routers, 4 switches, 3 bbs, and one frame-relay.
>> Frame-relay and one BB can be mixed. so minimum requirement is 13 devices.
>> I have used 26xx devices in past, but there were few issues which i feel
>> better to go with 3725, as these are devices presently used in Real Lab
>> also.
>>
>> Best Regards,
>>
>> On Wed, Aug 12, 2009 at 8:10 PM, Tony Varriale
>> <tvarriale_at_flamboyaninc.com>wrote:
>>
>> I'm not sure why you need that many devices. But try 2600s and less
>>> devices.
>>>
>>> Sent from my iPhone
>>>
>>>
>>> On Aug 12, 2009, at 3:56 AM, Rob Clav <robclav_at_gmail.com> wrote:
>>>
>>> Hi Folks,
>>>
>>>>
>>>> after two unsuccesfuls R&S lab v3 exams(Advice: You know if you are
>>>> ready
>>>> or
>>>> not), now I'm preparing the 3rd attempt in order to pass v4 R&S LAB.
>>>> Now I'm cutting down the expenses using more dynamips, the problems is
>>>> that I'm not able to run 13th devices running with an acceptable
>>>> performance
>>>> even using more than 4 Gb of RAM. I already applied all the performance
>>>> improvements like "IOS ghost" and so on. I'm thinking move to LINUX. But
>>>> any
>>>> advice will be really apreciated.
>>>>
>>>> By the other hand, I was using the IE materials for v3 and they are
>>>> fantastics, but there's nothing for v4 like mpls or I'm wrong. In
>>>> addition
>>>> of that, I saw at Cisco that the cisco lab assesors tests have been
>>>> remove
>>>> from the web, and replaced for a simulation of the new exam
>>>> structure (troubleshooting part and configuring part) taking 9 hours. Do
>>>> you
>>>> know how to buy the v4 assesors at CISCO site?? I saw like bootcamps
>>>> with the assesor bundles but says something like contact with a external
>>>> trainning company for contract them. Any experience related?
>>>>
>>>> Finally, do you have the link for taking the v4 lab beta exam ?
>>>>
>>>> Many thanks,
>>>> RobClav
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>>
>>>
>
>
>>>>
>>>
>>> Subscription information may be found at:
>>>
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>>
>>
>
> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>>
>
>
> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Aug 12 2009 - 13:46:49 ART