Re: QOS for outbound Catalyst Traffic

Hi Group,

This is my config.

mls qos

ip access-list extended ICMP
 permit icmp any any

class-map match-all ICMP
 match access-group name ICMP
!
!
policy-map Test
 class ICMP
  set dscp ef
!
!
interface FastEthernet1/0/1
 switchport access vlan 100
 switchport mode access
 spanning-tree portfast
 service-policy input Test

I issued a continuous ping but the result seems incorrect, there is no
match packet for icmp.

Switch#show policy-map interface fa1/0/1
 FastEthernet1/0/1

 Service-policy input: Test

   Class-map: ICMP (match-all)
     0 packets, 0 bytes
      offered rate 0 bps, drop rate 0 bps
     Match: access-group name ICMP

   Class-map: class-default (match-any)
     0 packets, 0 bytes
      offered rate 0 bps, drop rate 0 bps
     Match: any
       0 packets, 0 bytes
        rate 0 bps

Am i using the wrong verification method?

Thanks,
Robin

On Wed, Aug 26, 2009 at 2:32 AM, Joe Astorino<jastorino_at_ipexpert.com> wrote:
> Post your configs and we will take a look
>
> On Tue, Aug 25, 2009 at 1:05 PM, Robin Betterley <ro.betterley_at_gmail.com>
> wrote:
>>
>> Hi Group,
>>
>> Today i was playing around with my c3570 and trying to get it work
>> with outbound service-policy but IOS doesn't seems to take it.
>>
>> Assuming if i have a 10mb links between 2 3750 routed port, how can i
>> prioritize voice traffic and ensure at least 5 mb goes to voice
>> packets?
>>
>> Robin
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>
>
>
> --
> Regards,
>
> Joe Astorino - CCIE #24347 R&S
> Technical Instructor - IPexpert, Inc.
> Cell: +1.586.212.6107
> Fax: +1.810.454.0130
> Mailto: jastorino_at_ipexpert.com

Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 28 2009 - 15:37:50 ART